Author Topic: Arrow Diameter (Read 409 times)

jcarter · « **on:** September 24, 2008, 08:05:00 PM »

Stupid Question,

I bought some stuff off of **** from a gentleman, in the deal were 24 port orford cedar shafts but no diameter size was given. How do i determine if they are 5/16, 11/32, or 23/64 so i can order my points?

fowlarcher · « **Reply #1 on:** September 24, 2008, 08:12:00 PM »

Generally that measurement would be made with a caliper then converted to a fraction.

You could also compare them to drill bits if you have those sizes.

Paul Mattson · « **Reply #2 on:** September 24, 2008, 09:56:00 PM »

Measure the end with a ruler.

John3 · « **Reply #3 on:** September 24, 2008, 10:58:00 PM »

Do you have any other shafts? Most carbon are 5/16"...

A tape will always work...

JDS III

jcarter · « **Reply #4 on:** September 24, 2008, 11:09:00 PM »

Thanks for the info, i do have carbon shafts, CX Heritage 350's, I 'll get ont their site and check out their diameter and compare. Thanks for all the help everyone!

News:

Author Topic: Arrow Diameter (Read 409 times)

jcarter

Arrow Diameter

fowlarcher

Re: Arrow Diameter

Paul Mattson

Re: Arrow Diameter

John3

Re: Arrow Diameter

jcarter

Re: Arrow Diameter

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS