3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Anyone Shot Cabelas Carbons Shafts?  (Read 398 times)

Offline Soilarch

  • Trad Bowhunter
  • **
  • Posts: 591
Anyone Shot Cabelas Carbons Shafts?
« on: October 19, 2008, 02:40:00 PM »
Thinking of trying these merely for there price point.  I'll have a 50# bow and they'll likely around 31" long.


Any suggestions between choosing 55/70 or 65/80 spines?  Kind of difficult to translate 55/70 to a 350 or 400.

I'm sure it could get either to work with enough trial and error and weight up front.  Didn't know if anybody had experience as to what there actual spine is.
Micah 6:8

Offline Kevin L.

  • Trad Bowhunter
  • **
  • Posts: 1439
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #1 on: October 19, 2008, 04:08:00 PM »
I shoot the Carbon Xtremes from Cabelas in my recurve. The 55/70 are .400 deflection, same as GT 55/75. Mine are cut to 29" and the bow is 58@28. They shoot well with 200gr up front.
Appalachian LB 66"57@26
Appalachian LB 68" 60@28
Appalachian Flatbow 64" 56@28
Appalachian Archery RC 58"62@28
Bighorn LB 68" 57@28
HH Wesley LB 66" 53@27
HH Cheetah LB 66" 52@26
Saxon American RC 58" 60@28

Offline Soilarch

  • Trad Bowhunter
  • **
  • Posts: 591
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #2 on: October 19, 2008, 04:16:00 PM »
Thanks.  I'll probably get the 55/70s then.  I'll be an inch longer but 8# lighter.

Are you shooting a cut-past-center?

I won't be.
Micah 6:8

Offline Mark Hedges

  • Trad Bowhunter
  • **
  • Posts: 80
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #3 on: October 19, 2008, 07:08:00 PM »
You will need to put a lot of weight up front to get 55/75's to tune on a 50 pound bow that is not cut past center. Do they have 35/55's? Are you using FF or Dacron?

Mark

Offline Soilarch

  • Trad Bowhunter
  • **
  • Posts: 591
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #4 on: October 19, 2008, 07:14:00 PM »
Hold up, I thought cut-past-center didn't require as strong of spine.  Is that backwards?  Thought you could "build-out" the shelf if the arrow showed spine-strong.

I believe it's a dacron string.  I assume moving to a FF would require (enable the use of) a stiffer arrow?
Micah 6:8

Offline Mark Hedges

  • Trad Bowhunter
  • **
  • Posts: 80
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #5 on: October 19, 2008, 07:24:00 PM »
The closer your arrow is to being center shot, the stiffer spine you need.  If your spine is too weak you can build your side plate out.

FF will let you use a stiffer arrow than dacron.

Mark

Offline acolobowhunter

  • Trad Bowhunter
  • **
  • Posts: 775
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #6 on: October 21, 2008, 02:18:00 PM »
A hunting friend of mine shot these for a while.  He also bought them because they were cheap.  They did not fly very well.  I let him shoot my Gold Tip shafts mixed with his and you could really tell a difference.  Sometimes you get what you pay for.

Offline Jaz

  • Trad Bowhunter
  • **
  • Posts: 137
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #7 on: October 21, 2008, 04:26:00 PM »
Call Sipsey River, he's got arrows just as cheap,if not cheaper than Cabela's. I just ordered a dozen yesterday and I'm eagerly waiting to try them out.

Offline Randy Morin

  • Trad Bowhunter
  • **
  • Posts: 1235
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #8 on: October 21, 2008, 05:57:00 PM »
I've been hunting and shooting the Cabelas Stalker Supremes.  I like them a lot.  Killed over 15 deer and 2 bears, 3 turkeys, 2 coyotes and lots of stumps, rabbits etc. I put 225 gr. at the tip for a mid 50's # bow.  Total weight 530.  They are $60.00/dozen un-fletched I believe.  I never have checked the spine consistency though.  I love how glass smooth they are. I've heard they are the same shaft as GT made for Cabelas but I'm not sure.

Offline Featherbuster

  • Trad Bowhunter
  • **
  • Posts: 489
Re: Anyone Shot Cabelas Carbons Shafts?
« Reply #9 on: October 21, 2008, 06:41:00 PM »
I agree with Jaz, call John at Sipsey River.  He is a sponsor here.
We do not inherit the Earth from our Ancestors, we borrow it from our Children. - Tribe Unknown


Southern Traditional Archery

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©