Orion, I'm going to experiment with some 11/32" Surewoods. Do you have any guidelines or rule of thumb on using the metal rod inserts? At first I was thinking of using drill rod, unsure which diameter, but I've started looking at some readily available small diameter brass rods I saw at a hardware store. Several diameters available, but I've yet to determine weight per inch. Am I on the right track on extending the length into the shaft beyond that of the broadhead ferrule to reduce shaft breakage??
Not certain I'd ever break 19%FOC, but if I can up the FOC a bit while increasing shaft strength behind the head, I'd be satisfied. Not sure if this method would be a better route over a hardwood footing.
Thanks for any tips,
Daddy Bear