lighted nocks for CX heritage 90's

[bshunter]

Anyone know the inside diameter of the CX Heritage 90's, I want to use lighted nocks...wondering if any of the easton sizes might work? Thanks.

[Smallwood]

try e-mailing cx with the question.
also, cx makes lighted nocks for standard sized carbons, don't know if they will fit the 90s.

[JRY309]

CX Heritage 90's are slightly smaller then the standard 5/16" carbon,they use their own nocks and inserts.They are close to 9/32",the only Easton that might work would be the newer ST Epic's they are 9/32",I've seen lighted nocks for them.

[Tajue17]

Originally posted by Smallwood:
try e-mailing cx with the question.
also, cx makes lighted nocks for standard sized carbons, don't know if they will fit the 90s.

they will work but you have to put them in a drill and run the drill slow while pressing gently on the insert with a file or emery board to bring the diameter down..

[Lechwe]

Look up firenocks. Probably the best lighted nocks out there.

[James Wrenn]

The Easton H nocks should work in them.That is what fits the Epic shafts of same size.You can buy luminocks in that size and they should work just fine.