my method for removing glue (even super glue)and/or crown dip paint from carbon or aluminum-
1. get yourself a 1" dip tube 12" long, or make one from pvc.
2.remove nocks from arrows and for carbons,plug ends with golf-Ts or dip plugz, place however many shafts will fit into the empty tube.
3. fill it with MEK (mythel ethyl ketone)it's the same exact stuff that bohning labels as their thinner.
4. leave for 10 minutes and remove from dip tube.
use an old towel and just wipe whatever paint or glue residue is left from the shaft.
you now have a perfectly clean shaft with NO residue or oils on it that is ready to be crown dipped or refletched again!
5. repeat with the next batch of shafts, no need to use clean mek, it will do a whole dozen, then just throw out, or save it in a mason jar for next time.
***By all means, wear rubber gloves and have adequate ventilation when working with chemicals .