Bohninng fletch tape is all I use. Like others have mentioned, I have found arrows that have wintered hidden in the woods, and found that the feathers still hold tight.
I have learned a few things with it though. I found if my final finish coat is a water based polyurethane, it doesnt hold too well. I final coat with gasket laquer.
Another thing about tape is do not lay your arrows flat like on a table or workbench as the two feathers contacting the table may slide a bit and flatten out to a 180 degree offset. If you let the tape really set for a couple weeks, then it isnt as much of a problem. But I try not to lay my arrows on the feathers on a flat surface.
this may not be a problem with other finishes, such as regular bohning laquer.
I have hunted with taped arrows for several years now, and never had a feather come off. I do put a small drop on Duco on the ends of each feather. But for the easy of fletching, and the time savings, its the only way to go for me. I can do a dozen in under an hour.
Clamp the feather in your clamp, run the tape down the quill and cut it off with a razor knife. I use the edge of the knife blade at a 90 degree to the tape to scrape the tape backing loose, then pull it off an stick the fletch to the arrow. try not to touch the sticky surface too much.
Topic: Fletching tape (Read 881 times)
