3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: any one tryed making arrows from raman wood dowels???  (Read 1022 times)

Offline shaft slinger

  • Trad Bowhunter
  • **
  • Posts: 491
any one tryed making arrows from raman wood dowels???
« on: March 26, 2007, 08:59:00 PM »
It works!!!! this is 5 arrows at 20yds.
i bought 200 and they spined about 100# so i tapered them, that didn't help too much with the spine, so i tapered the whole shaft, from front to nock, and got them to spine about 70# that is what i shoot, they shoot as good as any i have shot

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: any one tryed making arrows from raman wood dowels???
« Reply #1 on: March 26, 2007, 09:08:00 PM »
I make 'em out of oak dowels, and get the same results. Gotta love em!!!
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline NY Yankee

  • Trad Bowhunter
  • **
  • Posts: 535
  • Wooden Bows, Wooden Arrows and 2-Blade Broadheads
Re: any one tryed making arrows from raman wood dowels???
« Reply #2 on: March 26, 2007, 10:28:00 PM »
Those are some nice looking arrows! So, where did you get your 200 ramin shafts and how did you do your tapering?
"Elk don't know how many feet a horse has!"
Bear Claw Chris Lapp

Offline SOS

  • Trad Bowhunter
  • **
  • Posts: 1571
Re: any one tryed making arrows from raman wood dowels???
« Reply #3 on: March 26, 2007, 10:36:00 PM »
With all those holes in your shed, you need some bigger 3D targets...or keep those shots at 10 yards - LOL!  Just made my first set, but using 5/16 from Micheals craft store.  Took back those that didn't spine around 50 for me.  Still working at straightening them.  Still cant' get them to shoot quite as well as my POC's.  But still trying!  Steve

Offline shaft slinger

  • Trad Bowhunter
  • **
  • Posts: 491
Re: any one tryed making arrows from raman wood dowels???
« Reply #4 on: March 26, 2007, 10:59:00 PM »
ny, got the dowls from**** site and made a jig for a 12" disk sander.
 sos, i have that shed staked to the ground real good, but some times it just jumps in front of the target, can,t do any thing about that.

Offline Longbowmark

  • Trad Bowhunter
  • **
  • Posts: 39
Re: any one tryed making arrows from raman wood dowels???
« Reply #5 on: March 26, 2007, 11:16:00 PM »
Ramin is a great heavy wood and it comes in high poundage spines but it is so brittle that they break when deflected off from limbs or other obstructions.
"The ruin of nations begins in the homes of it's people"

Offline Jon Stewart

  • Trad Bowhunter
  • **
  • Posts: 2567
Re: any one tryed making arrows from raman wood dowels???
« Reply #6 on: March 26, 2007, 11:24:00 PM »
What are ramin arrows.

Offline poekoelan

  • Trad Bowhunter
  • **
  • Posts: 173
Re: any one tryed making arrows from raman wood dowels???
« Reply #7 on: March 27, 2007, 01:51:00 AM »
Ramin is a tropical hardwood imported mostly from Malaysia. It is sold as dowels at hardware and craft stores. It is very inexpensive and makes a great arrow at a great price. Super tough. Someone said they break easy but that hasn't been the case for me at all. It's way  tougher than cedar. If they are breaking easy, there is probably severe grain run off. The grain on ramin is hard to read, there aren't visible rings like most arrow woods.

But it isn't being imported anymore from what I understand. Once stock is gone, that's it. Some have said that birch dowels are on par with ramin in price and durability, but I haven't tried them yet.

Offline Linc

  • Trad Bowhunter
  • **
  • Posts: 639
Re: any one tryed making arrows from raman wood dowels???
« Reply #8 on: March 27, 2007, 05:00:00 AM »
Ramin makes some good arrows.Only ones I ever broke was shooting at a steel pig.LOL.
Lincoln E. Farr

Offline Shakes.602

  • Trad Bowhunter
  • **
  • Posts: 3643
Re: any one tryed making arrows from raman wood dowels???
« Reply #9 on: March 27, 2007, 10:18:00 AM »
They are what I Shoot Too! And they are Cheap enough that should I happen to Destroy One, I can Make Another one!!
"Carpe Cedar" Seize the Arrow!
"Life doesn't get Simpler; it gets Shorter and Turns in Smaller Circles." Dean Torges
"Faith is to Prayer what the Feather is to the Arrow" Thomas Morrow
"Ah Think They Should Outlaw Them Thar Crossbows" A Hunting Pal

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©