3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Footing GT traditional 1535  (Read 317 times)

Offline mancole5

  • Trad Bowhunter
  • **
  • Posts: 116
Footing GT traditional 1535
« on: July 16, 2009, 03:17:00 PM »
Anybody know for sure what size?  It is said that 2117 fits the gt 3555.  The 3555 has outer diameter = .297.  The 1535 has outer diameter = .296.    

Any knowledge is appreciated,

Ryan
Logged

Offline mancole5

  • Trad Bowhunter
  • **
  • Posts: 116
Re: Footing GT traditional 1535
« Reply #1 on: July 16, 2009, 04:18:00 PM »
ttt  I need help!
Logged

Offline Jake Allen

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 239
Re: Footing GT traditional 1535
« Reply #2 on: July 16, 2009, 04:23:00 PM »
I am just starting to play around with footing carbons, but I would say a 2114 will fit better.
2114 is .300 id, where as a 2117 is .294 id.
I'm sure a few thousands of an inch can be sanded from the carbon.
Logged
TGMM Family of the Bow
NGT, TBG, SGTP & Compton's
Ye Olde Fartes & Sore Losers

Offline mancole5

  • Trad Bowhunter
  • **
  • Posts: 116
Re: Footing GT traditional 1535
« Reply #3 on: July 16, 2009, 04:36:00 PM »
I initially was thinking of using a 2113 shaft. After reading on here that the 2117 fits a 3555, it got me thinking that I may be wrong.  2117 is a lot easier to find!
Logged

Offline mancole5

  • Trad Bowhunter
  • **
  • Posts: 116
Re: Footing GT traditional 1535
« Reply #4 on: July 16, 2009, 04:46:00 PM »
Also...in Pac's video he was footing a heritage 150= od of .300 with a 2117 = id.294    I realize that he sanded the shaft down, which I don't mind doing.
Logged

Offline shortstroke 91

  • Trad Bowhunter
  • **
  • Posts: 671
Re: Footing GT traditional 1535
« Reply #5 on: July 16, 2009, 05:03:00 PM »
I used 2117 for mine and with the epoxy between the two I'd say it fits perfect.
Logged
shortstroke 91
TBOT Life Member
 
"BLOOD MAKES THE GRASS GROW"

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2665
Re: Footing GT traditional 1535
« Reply #6 on: July 16, 2009, 08:16:00 PM »
i've found that a 2117 fits a 55/75 perfectly.
Logged
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Offline vtmtnman

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1667
Re: Footing GT traditional 1535
« Reply #7 on: July 16, 2009, 08:21:00 PM »
Ryan if you have a 2117 shaft just try it over the 15/35.A .001 difference is nothing.Glue room if you will.  ;)
Logged
>>>>--TGMM family of the bow--->
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©