Arrow Makers Name/Logo

[Botsawana]

I was wondering how an arrow maker puts their name or logo on their custom arrows.  The ones I have seen look too similar and complicated for each one to be done by hand.  Do they use a decal or what. This is on dipped arrows generally.

[Grey Taylor]

In the past I have used a rubber stamp to apply a "maker's mark" rather than an actual name or signature. I don't do this any longer because I need an extra day to be sure the ink is dry and doesn't smear with the clear coat.

Guy

[BobW]

just saw some with a "maker's mark" burned in the shaft (or I thought it looked that way)...

[Don Stokes]

When I made Superceders, each shaft was burn-branded in the middle on the grain for nock alignment, with the letters TW (for Tallahatchie Woodworks) and a 3-digit number that matched the deflection class, like 480 for shafts in the 50-55# range.

We built a jig with the brander mounted underneath so that each shaft could be centered and properly oriented for the brand.

[2treks]

Some of them are on a wrap. I am sure onstringer could confirm this.
Chuck