3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: recommend a spine for me!  (Read 324 times)

Offline huntwithastick

  • Trad Bowhunter
  • **
  • Posts: 89
recommend a spine for me!
« on: August 01, 2009, 08:04:00 PM »
Guys, I usually shoot bows in the 55-65 lb range.  Because of a shoulder issue, I'm dropping down to a 46lb Chapparral Kaibab for an E. Oregon Mule Deer hunt.  Please recommend what shaft/spine/point weight combination you would go with in aluminum as well as carbon.  Thanks very much.
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery - Winston Churchill

"Tough Times Don't Last, Tough People Do"

Offline snag

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6337
Re: recommend a spine for me!
« Reply #1 on: August 01, 2009, 08:10:00 PM »
Is the 46# bow a cut to center bow? Is it a long bow? What is your draw length?
Isaiah 49:2...he made me a polished arrow and concealed me in his quiver.

Offline huntwithastick

  • Trad Bowhunter
  • **
  • Posts: 89
Re: recommend a spine for me!
« Reply #2 on: August 01, 2009, 08:21:00 PM »
It's R/D longbow that I believe is cut shy of center.  It's 46 @ 28 - which is very close to my draw length.
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery - Winston Churchill

"Tough Times Don't Last, Tough People Do"

Offline huntwithastick

  • Trad Bowhunter
  • **
  • Posts: 89
Re: recommend a spine for me!
« Reply #3 on: August 01, 2009, 08:27:00 PM »
snag - what part of Oregon are you from?  I grew up in Roseburg, but have been living out of the state for the last 20 years; compliments of the Army!  I do look forward to getting back there after retirement though!
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery - Winston Churchill

"Tough Times Don't Last, Tough People Do"

Offline jbuck9

  • Trad Bowhunter
  • **
  • Posts: 106
Re: recommend a spine for me!
« Reply #4 on: August 01, 2009, 08:31:00 PM »
If shooting aluminum I would say the 1916 would be great , but then if I was hunting mulies I would try a 2016 and go with a heavy , or heavier tip, and maybe slightly longer shaft, bare shaft and broadhead tune will tell you the story, cut your arrows down a little at a time till they come in, hope this helps jbuck

Offline BCWV

  • Trad Bowhunter
  • **
  • Posts: 1137
Re: recommend a spine for me!
« Reply #5 on: August 01, 2009, 09:30:00 PM »
I shoot a 45#@ 28 SR Swift cut to center and I use 500 carbons,with 3 gr. pr. inch weight tubes, cut 29 inches with 125 grn WW broad heads.
 Good arrow flight out of this bow.

Offline snag

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6337
Re: recommend a spine for me!
« Reply #6 on: August 02, 2009, 12:26:00 AM »
Those 1916s with 145gr tips cut to 29"bop ought to fly real nice for you.
Isaiah 49:2...he made me a polished arrow and concealed me in his quiver.

Offline Bill Carlsen

  • Trad Bowhunter
  • **
  • Posts: 3928
Re: recommend a spine for me!
« Reply #7 on: August 02, 2009, 08:25:00 AM »
A Beman  or Axis in 500 spine and 25 grains up front works for my wife who likes her bow at 46#. However, it is a recurve, center shot  so you might have to go with a slightly longer shaft and/or heavier point. Her arrows are 27" and weigh in at 500 grains.
The best things in life....aren't things!

Offline Schafer

  • Trad Bowhunter
  • **
  • Posts: 330
Re: recommend a spine for me!
« Reply #8 on: August 02, 2009, 11:29:00 AM »
3555 Gold Tips Should Work for carbons
“There’s more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.” - Fred Bear

53@29 Randy Morin Banshee
66@29 Schafer Silvertip

Offline huntwithastick

  • Trad Bowhunter
  • **
  • Posts: 89
Re: recommend a spine for me!
« Reply #9 on: August 02, 2009, 04:17:00 PM »
All - thanks for the replies; I'm going to start w/the 1916s a bit long and see where I end up.
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery - Winston Churchill

"Tough Times Don't Last, Tough People Do"

Offline George D. Stout

  • Trad Bowhunter
  • **
  • Posts: 3467
Re: recommend a spine for me!
« Reply #10 on: August 02, 2009, 07:02:00 PM »
You should be golden with 29" 1916, 125/145 grain points.   Don't get hung up on heavy weight arrows for mule deer.  Jack Howard used a lot of 2114 aluminum arrows and killed a pile of big game.  I'm using 2016 out of my 45# recurve and they are flying great.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©