Author Topic: Which size adapter for "green" Razorhead? (Read 574 times)

CMR · « **on:** March 30, 2007, 08:33:00 AM »

Which size short adapter do ya use w/the "green" Razorhead?
5/16 or 11/32?
Thanks in advance!

Golden Hawk · « **Reply #1 on:** March 30, 2007, 08:59:00 AM »

I belive they take the 11/32".

CMR · « **Reply #2 on:** March 30, 2007, 09:20:00 AM »

Thats what I thought but in another thread someone posted about the Razorhead, someone stated 5/16.

woodchucker · « **Reply #3 on:** March 30, 2007, 09:41:00 AM »

A 5/16" will set deeper into the ferrule and some folks think this make allignment better.I can't say for sure,I haven't had any problems with the 11/32"

For smaller diameter shafts like 2018's,2016's,1916's or carbons,you could use a 5/16" but for thicker shafts like 2117's,2216's, you will need to use the 11/32" or the insert will not butt up against the shaft.

SCATTERSHOT · « **Reply #4 on:** March 30, 2007, 12:10:00 PM »

If you are going to use the bleeder blades, you will need the 11/32" short adapter.

News:

Author Topic: Which size adapter for "green" Razorhead? (Read 574 times)

CMR

Which size adapter for "green" Razorhead?

Golden Hawk

Re: Which size adapter for "green" Razorhead?

CMR

Re: Which size adapter for "green" Razorhead?

woodchucker

Re: Which size adapter for "green" Razorhead?

SCATTERSHOT

Re: Which size adapter for "green" Razorhead?

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS