3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Need a bowstring  (Read 329 times)

Offline Legolas

  • Trad Bowhunter
  • **
  • Posts: 447
Need a bowstring
« on: August 20, 2009, 06:27:00 AM »
I use a reflex/deflex longbow and had fastflite on it. What are the experts recommendations for replacement?
I do not stay up on bowstring development.

Thanks.
Paulie
Things seem to turn out best for people who make the best of the way things turn out-Art Linkletter

Whether you think you can or you think you can't, you are probably right-Henry Ford

Offline LBR

  • Trad Bowhunter
  • **
  • Posts: 4221
Re: Need a bowstring
« Reply #1 on: August 20, 2009, 09:01:00 AM »
I'm not an expert by any stretch, but I'd go with Dynaflight '97 or 8125.  What's the draw weight?  That would determine the number of strands.  I'd also go with padded loops, and 62XS for the serving.

Chad

Offline xtrema312

  • Trad Bowhunter
  • **
  • Posts: 3163
Re: Need a bowstring
« Reply #2 on: August 20, 2009, 09:35:00 AM »
I think I need a new one on my new to me R/D LB also.   It is 55@29.  When do you know it is time for a new one in general?  I had a couple frayed fibers sticking out here and there before I waxed it real good, but no creep in the string length so far shooting it.  It is a FF now.  

I don't like the real skinny string with the small dia serving.  It is hard on my fingers.  What are the options to get a good fast, quiet, and easy on the finger string?  :campfire:
1 Timothy 4:4(NKJV)
For every creature of God is good, and nothing is to be refused if it is received with thanksgiving.

Firefly Long Bow  James 4:14
60" MOAB 54@29 James 1:17

Michigan Longbow Association

Offline Legolas

  • Trad Bowhunter
  • **
  • Posts: 447
Re: Need a bowstring
« Reply #3 on: August 20, 2009, 09:49:00 AM »
Chad Weaver,
57 pounder.
What is 62XS?
thank you Sir,
Paul
Things seem to turn out best for people who make the best of the way things turn out-Art Linkletter

Whether you think you can or you think you can't, you are probably right-Henry Ford

Offline twotimer

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 363
Re: Need a bowstring
« Reply #4 on: August 20, 2009, 09:52:00 AM »
bobby graham,g-strings.bobby will go out of his way to help you determine what string you need for any given bow,make sure it fits the nock you are useing,and offers a no nonsence money back gurantee.look on product reviews thread for his contact info,or pm me,i am sure i have it,as i have purchased several from him.regards,robert  :thumbsup:    :archer:    :coffee:
'TGMM FAMILY of THE BOW"at 211 degrees water is hot.at 212 it boils and cause's steam,which can run a locomotive.is it worth that one extra ounce of effort to finish first,the difference between good and great?

Offline LBR

  • Trad Bowhunter
  • **
  • Posts: 4221
Re: Need a bowstring
« Reply #5 on: August 20, 2009, 10:13:00 AM »
I've heard of people getting away with shooting a string for years, but I like to change mine when it starts showing any significant wear.  A little fuzz doesn't hurt, but a lot of fuzz or a broken strand, it gets replaced.  I usually change mine at least once a year anyway, but it's a convenient for me.

Serving size will depend on the number of strands in the string and the type nock you use.  12 strands of Dynaflight '97 will be fine on a 55@29 (you could use less), serving size depends on the nock.  If it bothers your fingers, you might consider a tab or glove with cordovan leather.

For 57#, you could go with 10 strands (maybe a little less, depending on your preferances) of Dynaflight '97 or 10-12 strands of 8125.  A few more strands wouldn't hurt, if you prefer a larger diameter string--just cost you a tad of performance.

62XS is a braided serving material offered by BCY.  I like it because it's tough, doesn't slip on the string easily (like Halo can), and I get a good release with it.

Chad

Offline Running Buck

  • Trad Bowhunter
  • **
  • Posts: 340
Re: Need a bowstring
« Reply #6 on: August 21, 2009, 08:52:00 AM »
Its a little bit of a pain, but I double serve all of my strings(8125) with diamond wrap on the bottom and crown or halo on top. I double serve only in the finger area to cut down on string weight.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©