New string

[sweet old bill]

I installed a new string from Chad at recurves.com. I put it one and untwisted it to get my brace height for a checkmate firebird  56 inch recurve, installed nock, and silencers... the bow seems to shoot well with almost zero noise.

My question is will I have to reset the nock point / brace height, after I have shot a few 100's shots ?

the new string is a dynaflight 97 material, my old string was  B50...

my thanks

Bill

[JRY309]

I would just check the brace height after some shooting until the string settles in.The nock point should not change by adjusting the brace height up or down alittle.

[LBR]

Probably will Bill.  I pre-stretch my strings, and Dynaflight has a lot less stretch/creep, but...they all settle in some.  How much depends on the material, strand count, draw weight, temps, etc.

Chad

[BD]

I ussually have to adjust a little. I would just keep an eye on the bh

[sweet old bill]

My thanks it has been two days and about 200- shots thru the bow and nothing has changed..

thanks for the info and help

Bill