3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Heritage 150's and 220 phantom  (Read 346 times)

Offline Ringneck

  • Trad Bowhunter
  • **
  • Posts: 978
Heritage 150's and 220 phantom
« on: September 02, 2009, 05:02:00 PM »
I have a Firefly longbow that is cut to center and am pulling 49 @ just under 29". I would like to shoot the 220 phantoms and have ordered the 150 Heritage shafts. I tried the 45/60's predator shafts but they were too stiff even with 250 grains when left at the full length of 30+. I'll know when I try them but was wondering if this combo should work or if the 150's will be too weak with this point weight?

Offline bigbuckmalik

  • Trad Bowhunter
  • **
  • Posts: 112
Re: Heritage 150's and 220 phantom
« Reply #1 on: September 02, 2009, 05:06:00 PM »
My guess is you should be in the ballpark for sure. I'd start with them long and cut back till they were perfect.

Offline WESTBROOK

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3385
Re: Heritage 150's and 220 phantom
« Reply #2 on: September 02, 2009, 05:12:00 PM »
Like BigBuck said, start long and trim them till there right.

I shoot 150's 30.5" w/200g BH @#53, so yea they should tune in fine.

Eric

Offline beachbowhunter

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2713
Re: Heritage 150's and 220 phantom
« Reply #3 on: September 02, 2009, 05:17:00 PM »
There is some difference between the 45/60 and 150s, but don't expect too much (less spine that is)
Ishi was a Californian                   :cool:

Offline Ringneck

  • Trad Bowhunter
  • **
  • Posts: 978
Re: Heritage 150's and 220 phantom
« Reply #4 on: September 02, 2009, 06:41:00 PM »
45/60's are .400 and the 150's are .487. Quite a bit of difference.

Offline Arwin

  • Trad Bowhunter
  • **
  • Posts: 3009
Re: Heritage 150's and 220 phantom
« Reply #5 on: September 02, 2009, 07:45:00 PM »
Oh my, we have nearly the same set-up,LOL! I'm using the 220 Phantoms (200 cause I took out the bleeders) and Heritage 150's, except I'm shooting a 51@27 St. Joe longbow and it is also cut to center. They fly awesome!!! My friend Dave is shooting 50@28 and using the same set-up too and getting great flight. I think you'll have excellent flight out of your bow.
Just one more step please!

Some dude with a stick and string chasing things.

Offline Ringneck

  • Trad Bowhunter
  • **
  • Posts: 978
Re: Heritage 150's and 220 phantom
« Reply #6 on: September 02, 2009, 08:42:00 PM »
The shafts were on the porch when I got home. They bareshaft slightly weak at 31 1/4" and a 220 head. Should be right on when fletched. Thanks!

Offline Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2798
Re: Heritage 150's and 220 phantom
« Reply #7 on: September 03, 2009, 06:58:00 AM »
thats a good set-up..  another nice head for that would be the BIG snuffer 160 w/ 42gr long adaptor glued in + the heritage insert--> even the stone walls will be ducking for cover  :)
"Us vs Them"

Offline Drew

  • Trad Bowhunter
  • **
  • Posts: 1509
Re: Heritage 150's and 220 phantom
« Reply #8 on: September 03, 2009, 08:05:00 AM »
Shawn,both my FireFlies 51@28, 52@28, like the 150's with a 50 grain brass insert and 220's Phantoms my draw is alittle over 29...
Just a Coyote Soul out wandering...

Offline T Folts

  • Trad Bowhunter
  • **
  • Posts: 1922
Re: Heritage 150's and 220 phantom
« Reply #9 on: September 03, 2009, 08:35:00 AM »
Shaw
I also have a Firefly 48#@28" and shoot 150's cut 30.5 and shoot 200 grains up front. I used the bareshaft planning method and plan on fine tunning using the paper method next.

Good luck
Terry
US ARMY 1984-1988

Offline Ringneck

  • Trad Bowhunter
  • **
  • Posts: 978
Re: Heritage 150's and 220 phantom
« Reply #10 on: September 03, 2009, 09:28:00 AM »
Good to hear from the Firefly owners   :thumbsup:

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©