I just got my 2nd Yukon tracks enforcer, not the elite. Like deadbolt said, I aim the corner of the blind out front,and unzipe a window on each side. If you need a lower window, just put on some iron one reinforcing and cut out a new window lower, make a horshoe cut, leave the bottom solid, or reverse and pull the material up, secure with a clothes pin off the line, make about a 10"x14" opening, was shooting out of mine tonight like this, using a double bull magnum 3 leg chair, was shooting dots at 20 yards. Using this method or a similar one, negates any negatives about windows. I have cut a horsehoe, put 2 buttons sewn on the corners you are going to lift up, and when leaving them dow, have another button sewn beside them,about 4 inches away, and strecth a rubber banc or small bunjee cord to keep them taught, works and cheap!!YOu can buy 3 of these for what one double bull costs. Also, they dont reflect UV light, alot ofblinds, right at daybreak and dusk, seem to just glow when reflectin UV light, have seen this from other blinds I have had. Not these, none whatsoever. I have no complaints whatsoever.