3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: homemade cresting machine - electrical question  (Read 369 times)

Offline TroyH

  • Trad Bowhunter
  • **
  • Posts: 283
homemade cresting machine - electrical question
« on: September 16, 2009, 02:17:00 PM »
Made myself a homemade cresting machine.  Getting ready to try it out, but am concerned that it spins too fast.  Was reading that it should spin around 300 rpm.  Mine is from a small fan motor and is probably much faster.
I bought a standard dimmer switch, but when I hook it up, the motor barely turns when the switch is turned all the way on.
The dimmer is a standard 120v, reads 600w.
I don't know much when it comes to electricity, just some basics, so is there a different dimmer switch I should get, or is the problem with the motor I'm using?
Logged
Formerly known as PastorHunter.

Offline Abram

  • Trad Bowhunter
  • **
  • Posts: 60
Re: homemade cresting machine - electrical question
« Reply #1 on: September 16, 2009, 02:29:00 PM »
This may sound stupid but is it a AC or DC motor?
Logged

Offline wvtradbow

  • Trad Bowhunter
  • **
  • Posts: 190
Re: homemade cresting machine - electrical question
« Reply #2 on: September 16, 2009, 02:33:00 PM »
Not sure about what you have,but old sewing machine motors work real well,with the foot pedal to control speed.
Logged
"I strive for mediocrity and sometimes achieve it." a close friend

Offline TroyH

  • Trad Bowhunter
  • **
  • Posts: 283
Re: homemade cresting machine - electrical question
« Reply #3 on: September 16, 2009, 02:35:00 PM »
It is an AC motor.
Logged
Formerly known as PastorHunter.

Offline CHAD

  • Trad Bowhunter
  • **
  • Posts: 165
Re: homemade cresting machine - electrical question
« Reply #4 on: September 16, 2009, 02:43:00 PM »
Pastorhunter,
I don't know exactly the motor you have but you will need a speed contol for a fan not a light dimmer switch.There is a dimmer called a triac based dimmer that you can get from a radio shack that would work but a speed control for a fan from  Home Depot or Lowes should work and is i think around $15.00.If you run into and problems send me a PM with you're phone number and we will work it out.
                     Chad
Logged

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: homemade cresting machine - electrical question
« Reply #5 on: September 16, 2009, 08:20:00 PM »
Just get in touch with Curtis Kellar at 7th Age Bowhunting- Curtis is THE EXPERT electrician on this site and will get you all squared away on that thing.

Ask anyone on this site they'll tell you the same thing!
Logged
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline Lewis Brookshire III

  • Trad Bowhunter
  • **
  • Posts: 1213
Re: homemade cresting machine - electrical question
« Reply #6 on: September 16, 2009, 08:21:00 PM »
LOL, man that was one FUNNY thread!!
Logged
"He is no fool who gives what he cannot keep to gain what he cannot lose."
- Jim Elliot: Missionary/Martyr.

Offline onewhohasfun

  • Trad Bowhunter
  • **
  • Posts: 735
Re: homemade cresting machine - electrical question
« Reply #7 on: September 16, 2009, 08:43:00 PM »
Sorry Ray, Don't sell Curtis short.
 . I beleive he has a masters in electrical engineering.
Logged
Tom

Offline Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9147
Re: homemade cresting machine - electrical question
« Reply #8 on: September 16, 2009, 08:53:00 PM »
Then why is all the hair burnt offa his knuckles?

Killdeer   :confused:
Logged
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Offline CHAD

  • Trad Bowhunter
  • **
  • Posts: 165
Re: homemade cresting machine - electrical question
« Reply #9 on: September 16, 2009, 09:08:00 PM »
PastorHunter, There are many different style motors out there and some might turn with a light dimmer but it's the wrong device for the job.I don,t consider myself an expert but have been an electrician for many moons.If you need some help let me know.      

               Chad
Logged

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: homemade cresting machine - electrical question
« Reply #10 on: September 17, 2009, 10:12:00 AM »
I think I remember reading about Curtis' prowess with homemade feather burners too!
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline nel

  • Trad Bowhunter
  • **
  • Posts: 94
Re: homemade cresting machine - electrical question
« Reply #11 on: September 19, 2009, 11:55:00 AM »
What kind of fan motor?

From an exhaust fan?
Logged

Offline Shakes.602

  • Trad Bowhunter
  • **
  • Posts: 3643
Re: homemade cresting machine - electrical question
« Reply #12 on: September 19, 2009, 12:10:00 PM »
In My Homade Crester, I used am Old Sewing Machine Motor with a Dimmer Switch to Slow it Down. Still Working as Good today as it did Five years ago!!
Logged
"Carpe Cedar" Seize the Arrow!
"Life doesn't get Simpler; it gets Shorter and Turns in Smaller Circles." Dean Torges
"Faith is to Prayer what the Feather is to the Arrow" Thomas Morrow
"Ah Think They Should Outlaw Them Thar Crossbows" A Hunting Pal
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©