3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: How Do You Sharpen Your Broadheads?  (Read 726 times)

Offline Hud

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2233
  • 360-921-5779
Re: How Do You Sharpen Your Broadheads?
« Reply #20 on: September 21, 2009, 05:51:00 PM »
King, well done. I am going to give it try.
TGMM Family of the Bow

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2661
Re: How Do You Sharpen Your Broadheads?
« Reply #21 on: September 22, 2009, 03:04:00 AM »
file then jewelstick stubby then strop on my armguard. "ready for water buff" sharp.
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Offline Young Buck

  • Trad Bowhunter
  • **
  • Posts: 63
Re: How Do You Sharpen Your Broadheads?
« Reply #22 on: October 15, 2009, 09:11:00 PM »
KINGWOULDBE is right on.
I am not judged by the number of times I fail, but by the number of times I succeed. And the number of times I succeed is in direct proportion to the number of times I can fail and keep trying.

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: How Do You Sharpen Your Broadheads?
« Reply #23 on: October 15, 2009, 09:39:00 PM »
10" flat diamond stones, then leather with polishing compound. Chopapopadopolis!  :D
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline Hot Hap

  • Trad Bowhunter
  • **
  • Posts: 3152
Re: How Do You Sharpen Your Broadheads?
« Reply #24 on: October 16, 2009, 02:25:00 AM »
I use a file and a ceramic crock stick. Hap

Offline vtmtnman

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1667
Re: How Do You Sharpen Your Broadheads?
« Reply #25 on: October 16, 2009, 05:09:00 AM »
Cheap stone I bought at Napa,and a small arkansas stone for the final stage.I use water over the stone,and sharpen all my two blades on them.I use a belt sander and a file for three blades.

I'd like to try one of those snazzy KME's every one raves about.
>>>>--TGMM family of the bow--->

Offline ethan

  • Trad Bowhunter
  • **
  • Posts: 1327
Re: How Do You Sharpen Your Broadheads?
« Reply #26 on: October 16, 2009, 07:17:00 AM »
I've always used a file and quickly got them shaving.  I recently bought the KME broadhead sharpener and it's amazing.  It doesn't really feel that much sharper compared to my file sharpened heads, but the angle is really steep making it hold it's edge alot longer.  I shot completely through a doe last Sunday evening.  Broke a rib coming out and stuck in the mud and the head would still shave hair.

Offline razorsharptokill

  • Trad Bowhunter
  • **
  • Posts: 3255
Re: How Do You Sharpen Your Broadheads?
« Reply #27 on: October 16, 2009, 03:26:00 PM »
Same as wingnut except I use a 1000 grit then 6000 grit waterstone then strop on leather with auto body buffing compound to finish.
Jim Richards
Veteran

USMC 84-88
Oklahoma Army National Guard 88-89
USMCR 89-96 Desert Storm
Oklahoma Air National Guard 2002- present. Operation Iraqi Freedom 2005(Qatar) and 2007(Iraq),
Operation New Dawn Iraq 2011,
Operation Enduring Freedom 2018 Afghanistan.
NRA Life Member.

Offline cahaba

  • Trad Bowhunter
  • **
  • Posts: 1773
Re: How Do You Sharpen Your Broadheads?
« Reply #28 on: October 16, 2009, 03:56:00 PM »
I use a file and a crock stick also. Then i strop it on a piece of leather. These items carry easy in the woods.
cahaba: A Choctaw word that means
"River from above"

Offline J-dog

  • Trad Bowhunter
  • **
  • Posts: 2006
Re: How Do You Sharpen Your Broadheads?
« Reply #29 on: October 16, 2009, 04:15:00 PM »
paper wheels from AK bow supply - best thing since sliced bread.

J
Always be stubborn.

Captain hindsight to the rescue!

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: How Do You Sharpen Your Broadheads?
« Reply #30 on: October 16, 2009, 05:25:00 PM »
I use the paper wheels on a bench grinder. It works really well and fast too. Alaska bow hunting sells them. I bought mine through a chef supply place on the net. Alaska bow wanted about $12 more.
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline NorthernCaliforniaHunter

  • Trad Bowhunter
  • **
  • Posts: 1563
Re: How Do You Sharpen Your Broadheads?
« Reply #31 on: October 16, 2009, 06:00:00 PM »
With a wet stone, dear Henry, dear Henry, dear Henry! With a wet stone dear Henry, dear Henry a stone!
"...there are no words that can tell the hidden spirit of the wilderness, that can reveal its mystery, it's melancholy, and its charm." Theodore Roosevelt

Find me at ShareTheBounty

Offline tradtusker

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3820
Re: How Do You Sharpen Your Broadheads?
« Reply #32 on: October 16, 2009, 07:09:00 PM »
KME
Diamond stone
curved file
acu sharp

depends what head
There is more to the Hunt.. then the Horns

**TGMM Family of the Bow**


Andy Ivy

Offline Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9147
Re: How Do You Sharpen Your Broadheads?
« Reply #33 on: October 16, 2009, 07:17:00 PM »
My bucket's got a holllllle in it...   :p  

I have been using a Lansky on two-bladed heads with the file from the Little Shaver to set angles, then a series of progressively finer stones.

Got a double-sided diamond stone (coarse/fine) for three-bladed heads.

Killdeer
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Offline michaelschwister

  • Trad Bowhunter
  • **
  • Posts: 576
Re: How Do You Sharpen Your Broadheads?
« Reply #34 on: October 16, 2009, 07:41:00 PM »
6" mill bastard file and light pressure. IMHO the easiest and best way to get a lethal hair poppin edge
"The best thing to give to your enemy is forgiveness; to a friend, your heart; to your child, a good example; to a father, deference; to your mother, conduct that will make her proud of you; to yourself, respect" - Benjamin Franklin

Online fishone

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 415
Re: How Do You Sharpen Your Broadheads?
« Reply #35 on: October 16, 2009, 08:23:00 PM »
KME

Offline No-sage

  • Trad Bowhunter
  • **
  • Posts: 483
Re: How Do You Sharpen Your Broadheads?
« Reply #36 on: October 16, 2009, 08:46:00 PM »
File.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©