3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Help-- Points don't fit --  (Read 205 times)

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Help-- Points don't fit --
« on: November 28, 2009, 10:01:00 PM »
:banghead:    :banghead:  

Got some Easton XX75 Camo Hunter Aluminum Shafts and none of my tips fit. The threads work but the unthreaded part that goes into the insert is too thick so I can't get it past one or two turns. Is it the inserts or do I need a different point? Who has has some success with the right points for these?

thanks
sam

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Help-- Points don't fit --
« Reply #1 on: November 28, 2009, 10:24:00 PM »
All inserts for Easton XX75 camo or any other Easton arrows are all 8/32 thread and the shank is the same.Have you tried running a 8/32 tap in it? I had a set of inserts in a set of carbons I had to run a tap through all of them.All inserts for carbons or aluminum are standard on the thread and shank,unless yours may be damaged.

Offline bushytail

  • Trad Bowhunter
  • **
  • Posts: 337
Re: Help-- Points don't fit --
« Reply #2 on: November 29, 2009, 05:24:00 AM »
Sometimes glue will come through the little hole in the insert when being glude in.Then the points won`t go all the way in.Heat the insert to soften the glue while turning your point in.They won`t come loose then.
Harold Wetzler

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©