3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: 1 [2]   Go Down

Author Topic: ACS Bow Input Request  (Read 1207 times)

Offline Yellow Dog

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2045
Re: ACS Bow Input Request
« Reply #20 on: December 24, 2009, 10:30:00 AM »
I draw 30" and I've had the 62", 64" and 66" limbs. My personal preference for all around shooting is the 64" on a 14" riser. Limb lengths are measured with a 14" riser, add 2" to the overall length of the bow for a 16" riser. A 16" riser with 62" limbs will make a 64" bow. They are fast, quiet and are cut 3/16 past center so they are very easy to tune with a broad range of arrow spines. Had and sold a 16" RC riser, at least with myself I had to grip it hard to shoot it well and it just wasn't for me. Here's a pic of the Standard grip, a "JK" low wrist grip and the grip on a 64" one piece. Fast stable shooting bows.

 
Logged
TGMM Family of the Bow

Offline KPaul

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 363
Re: ACS Bow Input Request
« Reply #21 on: December 24, 2009, 11:40:00 AM »
Wisconsin: My 64" ACS has 60#limbs @. 28".This scales out at 65# with my draw length of 30".still pretty smooth for me.
Logged
TGMM Family of the Bow

Men occasionally stumble over the truth,but most of them pick themselves up and hurry off as if nothing ever happened.

Offline wisconsin wood butcher

  • Trad Bowhunter
  • **
  • Posts: 445
Re: ACS Bow Input Request
« Reply #22 on: December 24, 2009, 12:25:00 PM »
good to know kpaul  i will have one of these beauts yellow dogs add has me drooling
Logged

Offline foudarme

  • Trad Bowhunter
  • **
  • Posts: 253
Re: ACS Bow Input Request
« Reply #23 on: December 25, 2009, 11:21:00 AM »
I draw 29" and have a 60" one piece and 4 TD with 14" risers and limbs which make some 62", 64" and 66" bows...for my DL the best one are the 66" but the 64" fit well too...the 62 and 60" bows staks a lot...I loose 1" of DL with the 60" that I can't draw more than 28".
Logged

Offline Cherokee Scout

  • Trad Bowhunter
  • **
  • Posts: 1849
Re: ACS Bow Input Request
« Reply #24 on: December 25, 2009, 02:41:00 PM »
I have had several of these bows. I just bought one of A&Hs Apogee risers. I like the grip on this riser better than the others.
Logged
John

Offline Cherokee Scout

  • Trad Bowhunter
  • **
  • Posts: 1849
Re: ACS Bow Input Request
« Reply #25 on: December 25, 2009, 02:43:00 PM »
I have had several of these bows. I just bought one of A&Hs Apogee risers. I like the grip on this riser better than the others.
Logged
John

Offline wisconsin wood butcher

  • Trad Bowhunter
  • **
  • Posts: 445
Re: ACS Bow Input Request
« Reply #26 on: December 25, 2009, 02:44:00 PM »
i assum the black in the riser when not listed as ebony it is phenolic?
Logged

Offline joevan125

  • Trad Bowhunter
  • **
  • Posts: 1937
Re: ACS Bow Input Request
« Reply #27 on: December 25, 2009, 03:04:00 PM »
I just sold my 14in jk low grip 64in and man i loved that bow but needed some money. Just as soon as i get back on my feet im going to order there 16 riser jk low grip 64-66in cocobolo with copperhead or eastern diamondback skins.

Sure hope 2010 is a better yera than 09. So far things seem to be going in the right direction.
Logged
Joe Van Kilpatrick

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: ACS Bow Input Request
« Reply #28 on: December 25, 2009, 03:22:00 PM »


The bottom bow is a 64" 1pc longbow.
Bow #2 from the bottom is 14" riser on a 62" bow; I modified the grip to be like the longbow.
Bow #3 is my son's bow, standard 14" riser, 62" long.
And the bow at the top is also 62" with a 14" riser modified to be like the JK grip.
The bows are 50-53#.
Logged

Offline joevan125

  • Trad Bowhunter
  • **
  • Posts: 1937
Re: ACS Bow Input Request
« Reply #29 on: December 25, 2009, 03:53:00 PM »
Hey Bjorn so do you like the ACS bows.  :bigsmyl:
Logged
Joe Van Kilpatrick

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8277
  • Contributing Member
Re: ACS Bow Input Request
« Reply #30 on: December 25, 2009, 07:45:00 PM »
Wood butcher:  The black in the riser is fiberglass.
Logged

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8277
  • Contributing Member
Re: ACS Bow Input Request
« Reply #31 on: December 25, 2009, 07:50:00 PM »
But my interest is piqued.  What is an Apogee riser?
Logged

Offline Ironman43

  • Trad Bowhunter
  • **
  • Posts: 12
Re: ACS Bow Input Request
« Reply #32 on: December 25, 2009, 08:44:00 PM »
It's the A&H target riser. If you go to A&H's home page and scroll down it is on the right hand side,center of the page.
Logged
Pages: 1 [2]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©