Flem twist untwisting?

[blind one]

I have a flem twist string(b50) that is starting to untwist. Can I just serve the string on the ends of the twist to keep it in place or will this mess it up somehow?....Thanks, Roy

[wingnut]

Should not be untwisting unless the wraps are wrong.  Is it new?

Mike

[blind one]

I might not be using the right words, so here is a picture. The string isnt new, but it doesnt have a lot of shots on it either(200 maybe).....Roy

   

[ranger 3]

From the pics, it looks like it is just the ends and that is normal, just cut the ends off and wax real good.

[koger]

Those are just the tag ends, I make my own and unless you stagger the lengths or trim the endw with a razor, this will happen. Nothing to worry about. If you want them to look better,wax them good, smooth it down.

[blind one]

Thanks guys. I will just trim and wax.....Roy

[Jeremy]

I leave the tag ends hanging out on some strings more than that on purpose... helps quiet string slap on recurves w/o adding anything else to the string.

[lpcjon2]

It looks like then didn't stagger the cuts on the string end before twisting.If you wax them up real good I use a blow dryer on low heat to melt the wax in deep and then a little more on top that may help.If you are not sure you trust it get a new string.