Magnus I factory grind?

[flatlander37]

Guys, I am looking to try Landshark160's method of sharpening some Magnus I 160 grain heads when I buy them, and was wondering if anyone knew the factory grind on them.  Also has anyone used the S-24 file set from 3rivers, and with what results?  Thanks, Mark

[Charlie Lamb]

It's aweful darn close to 25 degrees.

[flatlander37]

Thanks for the info Mr. Lamb.

[SlowBowinMO]

Originally posted by Charlie Lamb:
It's aweful darn close to 25 degrees.

And one of the best grinds in the business to boot.  

[LKH]

I've always used the Tru-Angle files and diamond on 2 blades.  Anyone know what their angle is????

[Bill Carlsen]

The Mag I's take an incredibly sharp edge. If you do it the way Landshark did his with the Razoredge jig you will not be disappointed in any way.

[flatlander37]

That's what I am looking to duplicate Bill, 'cause I am sharpening challenged!

[tradtusker]

yip pretty close to 25 degrees
i sharpen with KME or a good file they get very sharp they'r also my favorite broadhead

[cacciatore]

They are the broadheads that come out the sharpest from my tools.

[NDTerminator]

I have both the S-24 file set ups for 2 blades and for Snuffers, and they work great.  A few passes on the files then a couple across the strop and look out!

Tip:  Donl honk down on the broadhead as those files are efficient and will remove a lot of metal. Easy does it and it only takes a few passes.  The first Snuffer I sharpened on them, I removed so much metal I almost filed through where the bottom of the blade meets the base.

Even easier, I use a G5 sharpener & strop.  5 or 6 pulls through then a couple passes on the strop produce a wicked sharp edge on out of the package Magnus broadheads...