3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: My bow is tillered how?  (Read 166 times)

Offline MikeP in WV

  • Trad Bowhunter
  • **
  • Posts: 35
My bow is tillered how?
« on: January 11, 2010, 07:32:00 AM »
I normally shoot a MH Takedown 3 under and I don't know how it's tillered but I keep the brace height at about 7" and the nockheight at 1/2" or 5/8" and it shoots great and arrows fly great.  Just got a Montana LB and the nockheight is about 1/8" and the arrows fly better shooting split.  Is the Montana tillered a certain way?  How can I tell what my two bows are tillered for?  Can I compensate for tillering by moving the nock or switching styles?  Please educate me.  I prefer 3 under BTW.
Thanks,
Mike

Offline moebow

  • Trad Bowhunter
  • **
  • Posts: 2509
Re: My bow is tillered how?
« Reply #1 on: January 11, 2010, 08:21:00 AM »
Measure from the string (braced) to the upper and lower fade outs.  The very end of the riser wood where it disappears into the limbs.  If the upper measurement is larger than the lower by an eighth to a quarter inch, the bow is tillered for split finger.  If the measurement is the same it is for three under.  You can compensate for split tillering to shoot three under by raising your nocking point height -- you just have to play with it, all bows are a little different.
11 H Hill bows
3 David Miller bows
4 James Berry bows
USA Archery, Level 4 NTS Coach

Are you willing to give up what you are; to become what you could be?

Offline xtrema312

  • Trad Bowhunter
  • **
  • Posts: 3163
Re: My bow is tillered how?
« Reply #2 on: January 11, 2010, 12:29:00 PM »
I can shoot most of my split finger bows 3 under with about a 5/8" nock set height.  1/8" seems low, but if it is shooting ok split it likely needs a little more 3 under.  Just play with it a little.
1 Timothy 4:4(NKJV)
For every creature of God is good, and nothing is to be refused if it is received with thanksgiving.

Firefly Long Bow  James 4:14
60" MOAB 54@29 James 1:17

Michigan Longbow Association

Offline MikeP in WV

  • Trad Bowhunter
  • **
  • Posts: 35
Re: My bow is tillered how?
« Reply #3 on: January 11, 2010, 01:52:00 PM »
That makes sense.  My MH takedown is about twenty years old and I'll bet it was tillered for split-fingers and it wasn't until I got the nock height up to 5/8" that it started to really shoot great for me (at least as good as I can shoot it)  Make sense to you?

Offline BowHuntingFool

  • Trad Bowhunter
  • **
  • Posts: 3192
Re: My bow is tillered how?
« Reply #4 on: January 11, 2010, 02:43:00 PM »
The Montana is a great bow, its tillered for split fingers. I shoot mine 3 under and my arrows fly like darts! Sounds to me yours is to low, I would raise it a tiny bit at a time, I've found raising/lowering the nock point the slightest will affect the arrow flight bigtime!
>>>---Joe Bzura---->

Big River Longbow 66" 52# @ 28"
Big River Longbow 66" 47# @ 28"
Big River Longbow 62" 52# @ 28"
Big River Recurve 60" 48# @ 28"
NewWood Longbow 58" 45# @ 28"

Wisconsin Traditional Archers
      Ojibwa Bowhunters

Offline George D. Stout

  • Trad Bowhunter
  • **
  • Posts: 3467
Re: My bow is tillered how?
« Reply #5 on: January 11, 2010, 03:07:00 PM »
Tillering is very much over-stated regarding shooting styles.  For years, guys and gals shot barebow by stringwalking with so-called split finger tillered bows.  There may be enth' degrees of difference, but it won't amount to much.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©