Carbon Arrows/FMJ help

[Hatchet Jack]

I made the switch from the dark side after last bow season. I been shooting my Great Plains recurve 55@28-64" just working on form with the arrows I used with my compound. Im ready to match arrows for my recurve and I want to shoot carbon for their durability . My draw is 29.5 so I gess Im pulling about 58lbs. My compound arrows were Eastons Full Meatal Jackets 9.9 grain per-in" @ 28.5". These are a metal/carbon arrow and the shoot like darts out of my recurve. They are 400 spine. Do you guys think these would be a good match for my GP recurve if they were theright lenght for my draw. If not what spine or carbon arrow would you guys recommend! Thanks

Hatchet Jack

[joel smith]

really surprised those 400's are shooting that well at only 28.5". I've done a little playing around with the FMJ's and my 60# and 55# bows  won't shoot 400's even full-length. i'm shooting 500's cut to 30" and that's with 175 grains on the front end

[Hatchet Jack]

SO YOU THINK I SHOULD go with the 500's. The 400 seem to be flying ok and they are fast. I never did bare shaft them. I had 150gr tip and insert? up front with 5" feathers. The 500's are a stiffer spine?? Thanks for your help!!

Hatchet Jack

[joel smith]

nope, 500's are softer---remember, Easton and Beman shafts numbers reflect their actual bend rate so a larger number means it bends more. PSE and others are the opposite, the larger numbers are stiffer