3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: ILF limb construction Pro's - Con's  (Read 152 times)

Offline fixer

  • Trad Bowhunter
  • **
  • Posts: 167
ILF limb construction Pro's - Con's
« on: January 13, 2010, 03:35:00 PM »
I have been looking at ILF limbs, some with standard glass and wood lay up, then glass wood and carbon, then glass foam and carbon. Other than the obvious price difference, is there that much difference in performance to warrent the price difference. I have a couple of bows with carbon and I don't see much difference but I don't have a chronograph to check. Any input would be appreciated.  :confused:

Offline Bill Carlsen

  • Trad Bowhunter
  • **
  • Posts: 3928
Re: ILF limb construction Pro's - Con's
« Reply #1 on: January 13, 2010, 06:31:00 PM »
Sid at Border told me that for $100 more I could  have foam limbs and would gain maybe 2 fps. I'm trying his carbon/wood HEX5's and when I get them I'll tell you what I think. Currently I am shooting Winex limbs which are Carbon/Foam. Best limbs I have ever shot. We'll see how the HEX5's compare.
The best things in life....aren't things!

Offline wingnut

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 6179
Re: ILF limb construction Pro's - Con's
« Reply #2 on: January 13, 2010, 06:35:00 PM »
Bill, I think you will like the HEX5s.  They are quite a limb.  I got to test and shoot them when Rusty brought all of his out last month.

By far the best set of limbs in the bunch.  But the Win Win limbs that were a bunch cheaper were my second favorite.

We just glued our second prototype curve limb up today.  Looking forward to putting them through the paces.

Mike
Mike Westvang

Offline njstykbow

  • Trad Bowhunter
  • **
  • Posts: 104
Re: ILF limb construction Pro's - Con's
« Reply #3 on: January 13, 2010, 06:37:00 PM »
I've got Samick Masters...which are carbon/wood...Samick Extreme BF's...which are carbon/foam...and WinEx...which are carbon/foam.  I don't own, but have shot several glass/wood and carbon/wood limbs from Samick.  On the top of the line limbs, the carbon/wood are not quite as smooth, but are a few feet per second faster.  I think the consistency from limb to limb is better with carbon/foam due to the removal of the difference in wood densities.  

Bottom line...blindfold a guy and tell him to shoot them all and tell the difference...he probably can't because they're almost all good.

Joe

Offline katman

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3573
Re: ILF limb construction Pro's - Con's
« Reply #4 on: January 13, 2010, 06:40:00 PM »
Foam core with carbon should be faster than glass/wood since they have less mass, although the difference is not earth shattering. Also certain carbon layers can add to limb stability. Only you can decide if the price is worth it.

I have found I can sometimes go a few pounds lighter with the high tech limbs than entry level, and so I use them for this reason.
shoot straight shoot often

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©