3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: "clicker" use and set up  (Read 330 times)

Offline dick sable

  • Trad Bowhunter
  • **
  • Posts: 133
"clicker" use and set up
« on: January 13, 2010, 06:22:00 PM »
I bought a "crick-it" and it arrived today.  I understand that they are designed to be set up just a fraction short of your draw length and then supposedly a little back tension sets it off.  Is that the way most of you trad shooters use it?  All I really want to do is be sure that I am really coming to my full draw/anchor.  I don't tend to look and hold once I hit anchor!  Am I on the right track with my thinking for how I'd like to use the clicker - or am I wasting my time? I thought it would be a great "form training" device.  Comments and observations appreciated.
Dick

Offline blueline

  • Trad Bowhunter
  • **
  • Posts: 400
Re: "clicker" use and set up
« Reply #1 on: January 13, 2010, 06:30:00 PM »
You can accomplish what you are wanting to do. I generally release when I hit full draw. With the click it You relax your hand ( or release the arrow) when you hear the click, that will train you when to let go. Enjoy
Blueline

Mahaska  66" 47 @ 29
Morrison 58" 54 @ 28
Bear grizzly 58" 45@28

Offline mooseman76

  • Trad Bowhunter
  • **
  • Posts: 1114
Re: "clicker" use and set up
« Reply #2 on: January 13, 2010, 06:35:00 PM »
I've been thinking about one as I've been "snap shooting" a bit the past 2 years.  I thought maybe it would help me cure it.  How do you set them up and does the little chain do any damage to the limb when I comes forward?

  • Guest
Re: "clicker" use and set up
« Reply #3 on: January 13, 2010, 06:57:00 PM »
Yes, the chain "can" damage the finish on the limbs. It can make some noise too. I throw the chain away.  I replace it and and the string with the cord like the compound guys use to make those string loops.  I leave a 1" tag through the string and adjust it that way.

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
Re: "clicker" use and set up
« Reply #4 on: January 13, 2010, 07:01:00 PM »
What Jim said....regarding the chain!!

Do a search over on the Shooter's Forum. Lost of good clicker set-up info there.

Offline doowop

  • Trad Bowhunter
  • **
  • Posts: 276
Re: "clicker" use and set up
« Reply #5 on: January 13, 2010, 07:29:00 PM »
When I shot one I used a round shoe lace from Wally World. The kind for dress shoes. No chain. Tie a knot in the end and put a drop of super glue on it and let it dry. Run the string thru the back of the blade to the bow string. Untwist the bow string and run the string thru it at your draw length. Tie a knot in it and another drop of glue. NOT on the bow string. Pull the knot past the string a little and let dry. Adjust draw length by pulling clicker string up or down bowstring. Shot a clicker that way for years before finally switching lefty. Good luck.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©