3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Sharpening Heads??  (Read 299 times)

Offline Cmalone1

  • Trad Bowhunter
  • **
  • Posts: 164
Sharpening Heads??
« on: January 14, 2010, 04:50:00 PM »
I didn't really know where to put this but since i'm going to be hunting hogs with them i figured i would put it here..

I have some magnus IIs and zwickeys coming...and i'm wondering what a good sharpner to put a SCARY sharp edge on them...i am using them for hog hunting but will prob use them on deer next fall...so i want something i can keep them really sharp all the time...i will be using broadhead sheaths to keep them sharp in my back quiver...

I have heard that to finish them off strop the blades and it will put the best edge you can get!!

any info would be great guys!!

Thanks,
Coty

Offline Bill M.

  • Trad Bowhunter
  • **
  • Posts: 102
Re: Sharpening Heads??
« Reply #1 on: January 14, 2010, 05:01:00 PM »
A KME will get them SCARY sharp

Offline Col HJ

  • Trad Bowhunter
  • **
  • Posts: 35
Re: Sharpening Heads??
« Reply #2 on: January 14, 2010, 05:49:00 PM »
Yeah KME or a Lansky will do it. Lansky is 20 bucks at your local Academy.

Offline Cmalone1

  • Trad Bowhunter
  • **
  • Posts: 164
Re: Sharpening Heads??
« Reply #3 on: January 14, 2010, 07:44:00 PM »
anybody know where i can get a KME for decent price? I have heard really good stuff about them but don't know if i wanna spend the 80 bucks for it...also should i get a leather strop and run my heads over it? i have heard of some kind of 21kt gold oil people use on their strops...

Online pdk25

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4933
Re: Sharpening Heads??
« Reply #4 on: January 15, 2010, 11:35:00 PM »
The KME sharpener is not as expensive as you say.  It's only that expensive if you get the stones as well.  You really don't need to get real expensive stones initially.  A coarse and fine stone, then some cardboard and you'll good to go.  It's a great product and the customer service can't be beat.

Offline Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 28640
Re: Sharpening Heads??
« Reply #5 on: January 16, 2010, 11:57:00 AM »
Moving to PowWow....
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Offline legends1

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1793
Re: Sharpening Heads??
« Reply #6 on: January 17, 2010, 02:43:00 AM »
I use a Lansky

Offline joe skipp

  • Trad Bowhunter
  • **
  • Posts: 4314
Re: Sharpening Heads??
« Reply #7 on: January 17, 2010, 02:48:00 AM »
KME...Ron's product is the best out there if your not proficient at using a file. Plus, if you have any questions, call him and he'll take you through the process.   :thumbsup:
"Neal...is this heaven?" "No Piute but we are dam close". Top of the Mtn in Medicine Bow Nat Forest.

Offline ishoot4thrills

  • Trad Bowhunter
  • **
  • Posts: 3445
Re: Sharpening Heads??
« Reply #8 on: January 17, 2010, 05:13:00 AM »
Get a KME. You'll be glad you did. Try posting in the classifieds forum on this website that you want a KME Broadhead Sharpener. That's what I did recently and got one pretty quickly. Awesome product and easy to use.
58" JK Traditions Kanati Longbow
Ten Strand D10 String
Kanati Bow Quiver
35/55 Gold Tip Pink Nugents @ 30"
3 X 5" Feathers
19.9% FOC
49# @ 26.75"
165 FPS @ 10.4 GPP (510 gr. hunting arrow)
171 FPS @ 9.7 GPP (475 gr. 3D arrow)
3 Fingers Under

Offline Jon Shade

  • Trad Bowhunter
  • **
  • Posts: 207
Re: Sharpening Heads??
« Reply #9 on: January 17, 2010, 08:42:00 AM »
I've had a Lansky for years. It has always helped me put a great edge on my magnus broadheads or knives. If I were buying today, I may very well try KME. I've heard great things about there sharpener and customer service.

Offline NDTerminator

  • Trad Bowhunter
  • **
  • Posts: 1181
Re: Sharpening Heads??
« Reply #10 on: January 17, 2010, 09:05:00 AM »
The KME is a w/o question a great system with one drawback, it's price.  The full set up is well in excess of $100.  

The Tru Angle offerings are good too.  I know I have every one. They are a bit less costly than the KME.

What I've used for the last few years with excellent results is a G5 Sportsman's Sharpener (a carbide pull through type) and a leather strop.  I can take an out of the pack Magnus and with my G5 & a strop, have it scary sharp in well under 5 minutes. I've killed deer just peachy with broadheads sharpened on this set up.

It's KISS simple and affordable...
"As Trad as I wanna be"

"It's all just archery, and all archery is good"

Offline Fishnhunt

  • Trad Bowhunter
  • **
  • Posts: 262
Re: Sharpening Heads??
« Reply #11 on: January 17, 2010, 09:05:00 AM »
I had a lansky but not the skills to use it. Also I was always afraid I'd cut myself when sharpening w/ the lansky.

IMO, the KME is more user friendly and safer. I use my KME over sandpaper, not stones.  Sandpaper does not last as long as the stones but it works much faster for me.

Good luck

Offline razorsharptokill

  • Trad Bowhunter
  • **
  • Posts: 3255
Re: Sharpening Heads??
« Reply #12 on: January 17, 2010, 11:35:00 AM »
Definetly the KME, hands down!
Jim Richards
Veteran

USMC 84-88
Oklahoma Army National Guard 88-89
USMCR 89-96 Desert Storm
Oklahoma Air National Guard 2002- present. Operation Iraqi Freedom 2005(Qatar) and 2007(Iraq),
Operation New Dawn Iraq 2011,
Operation Enduring Freedom 2018 Afghanistan.
NRA Life Member.

Offline longstiks

  • Trad Bowhunter
  • **
  • Posts: 425
Re: Sharpening Heads??
« Reply #13 on: January 17, 2010, 11:43:00 AM »
I got the KME knlfe sharpener instead of the broadhead sharpener and it works great on both BHs and knives. I'm not really sharpening impaired but my heads and knives are now really scarey sharp like never before. Ron's customer service is second to none in my experience!
Denny

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: Sharpening Heads??
« Reply #14 on: January 17, 2010, 11:45:00 AM »
IMO they all work, all you have to do is practice. File, and strop on cardboard, is as good as any-and you have to practice.
Some of the systems will require removing the head from the arrow to sharpen-that's OK for screw ons, and too much trouble for glue ons.
Check it out and remember to practice.

Offline amar911

  • Trad Bowhunter
  • **
  • Posts: 2860
Re: Sharpening Heads??
« Reply #15 on: January 18, 2010, 01:35:00 AM »
KME is great.

Allan
TGMM Family of the Bow

Offline Jim Curlee

  • Trad Bowhunter
  • **
  • Posts: 109
Re: Sharpening Heads??
« Reply #16 on: January 18, 2010, 09:03:00 AM »
10" mill bastard, finish with a steel.
Jim

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©