3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Dulled broadheads...HELP!!!  (Read 834 times)

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Dulled broadheads...HELP!!!
« on: April 16, 2007, 08:53:00 PM »
Out of the box, I can get a lot of broadheads shaving sharp, no problem. But occasionally when practicing with them, I miss my 3-D target, and the heads bury into the ground. Now, our soil is really sandy, and everytime I retrieve the heads, I can no longer get them sharp. For the life of me, I don't know what to do. Anyone else encounter this problems...
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Online Roger Norris

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 3576
    • Traditional Woodsman
Re: Dulled broadheads...HELP!!!
« Reply #1 on: April 16, 2007, 08:58:00 PM »
Do you use a file?
https://www.tradwoodsman.com/

"Good Lord....well, your new name is Sledge."
Ron LaClair upon seeing the destruction of his new lock on the east gate

"A man that cheats in the woods will cheat anywhere"
G. Fred Asbell

Offline bowdude

  • Trad Bowhunter
  • **
  • Posts: 576
Re: Dulled broadheads...HELP!!!
« Reply #2 on: April 16, 2007, 09:08:00 PM »
File, steel, leather, shave arm hair, (if not- repeat), put in quiver.

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Dulled broadheads...HELP!!!
« Reply #3 on: April 16, 2007, 09:09:00 PM »
Yeah. I've tried resharpening em with all sorts of things, especially the file. Never works...
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline pintail_drake2004

  • Trad Bowhunter
  • **
  • Posts: 535
Re: Dulled broadheads...HELP!!!
« Reply #4 on: April 16, 2007, 09:10:00 PM »
start with a rough stone: i use arkansas soft stones. then go to a ceramic stone, followed by a hard arkansas stone....when you are done the edge will be pretty sharp, but you arent there yet. I prefer to use a pair of old denim jeans to hone the edge the last lil bit. follow with a soft leather strop.
This is how i sharpen all of my cutting blades. I personally do not use a file because it is easier to get the bevel off. I only use a file to remove large burrs.

Offline Barney

  • Trad Bowhunter
  • **
  • Posts: 921
Re: Dulled broadheads...HELP!!!
« Reply #5 on: April 16, 2007, 09:15:00 PM »
Get a lansky. Epoxy a small file to a pc of 9 ga. wire. Start with that, then work your way through the stones. I've never seen a broadhead I couldn't sharpen this way.

Offline strick9

  • Trad Bowhunter
  • **
  • Posts: 271
Re: Dulled broadheads...HELP!!!
« Reply #6 on: April 16, 2007, 09:17:00 PM »
Sharpening is an lost art to most, I have been sharpening various items since I was four when I got my first knife , which I lost and yes got whooped good for loosing it.. point is be patient with your strokes and pay close attention to angle, pressure and direction one bad stroke kills five good ones..be patient..
“The only thing necessary for the triumph of evil is for good men to do nothing”

Offline TRADITIONAL ONLY

  • Trad Bowhunter
  • **
  • Posts: 225
Re: Dulled broadheads...HELP!!!
« Reply #7 on: April 16, 2007, 09:43:00 PM »
ok Chris, heres your solution, DONT MISS!

and use a good backstop...

ok, yall have sandy soils up there, weve got a more clayish soil down here...  ever heard of the Ol Alabamy Red Clay? were famous for it,  and its the most nastiest crap there is...
If its brown its down; thats my motto.


"The great questions of the day are decided... by blood and iron"  Otto von Bismark

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Dulled broadheads...HELP!!!
« Reply #8 on: April 16, 2007, 09:51:00 PM »
I wanna thank you all for your advice. I just used several of your methods, choosing the best parts from each, and finally, FINALLY, got an edge that shaves hair. Y'all have no idea how much this was driving me crazy...
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline pintail_drake2004

  • Trad Bowhunter
  • **
  • Posts: 535
Re: Dulled broadheads...HELP!!!
« Reply #9 on: April 16, 2007, 11:11:00 PM »
well can ya shave with it then? that is the best test there is.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©