Author Topic: New 16" ILF Riser (Read 283 times)

Bob Morrison · « **on:** March 03, 2010, 02:25:00 PM »

They just came in today and are ready to go.

Longbowz · « **Reply #1 on:** March 03, 2010, 02:39:00 PM »

Care to share a little more info about them?

Ryan Sanpei · « **Reply #2 on:** March 03, 2010, 02:39:00 PM »

Sweet!

I like that lowered plunger hole. I used to shoot my das with a shelf/plunger combo but I always had to build the shelf up a bit with abs.

How short of a recurve can you make with this riser?

fido dog · « **Reply #3 on:** March 03, 2010, 02:58:00 PM »

What is "ILF"? :( :rolleyes: :(

JRY309 · « **Reply #4 on:** March 03, 2010, 03:06:00 PM »

ILF means International Limb Fit,you can get limbs from many different manufacturers.You can any ILF riser to use any ILF limbs.

Blacky · « **Reply #5 on:** March 03, 2010, 03:07:00 PM »

Fido,

ILF means International Limb Fitting system and is a (even though not defined) standard that most manufacturers use to make their risers and limbs interchangable. So you could use a riser from X-company and put on limbs from Y-company.

Hey Bob,

cool looking riser.

Blacky

fido dog · « **Reply #6 on:** March 03, 2010, 03:11:00 PM »

Oooooh.....I see. I've seen it a bazillion times, but just never knew.

Thanks!

anw0625 · « **Reply #7 on:** March 03, 2010, 03:19:00 PM »

What is the cost and can it be shot off the shelf?

Spectre · « **Reply #8 on:** March 03, 2010, 03:31:00 PM »

what anw0625 said...

Blacky · « **Reply #9 on:** March 03, 2010, 03:43:00 PM »

I have no idea about the cost, yet, but it can be shot off the shelf. It's pretty much like all the other risers with a flat shelf. You can use felt pads from Wal-Mart and put one on the shelf in conjunction with a low berger button. Or you can use two felt pads.
The picture shows, how to fix the pads. I found that pic at the Pirate's forum.

Blacky

Ryan Sanpei · « **Reply #10 on:** March 03, 2010, 03:59:00 PM »

Yup, I used to use a shelf/plunger combo. The shelf was tougher than the flipper and the plunger allowed for more fine tuning and aided in release errors. I shot my 1st generation das bows like that.

Bob Morrison · « **Reply #11 on:** March 03, 2010, 04:14:00 PM »

Yes it can be shot off the shelf,The lower hole is for a plunger for off the shelf, I'm not sure if you can it but the shelf is radiused. Riser without A grip is $395.00. I have low and med grips comping from Jager, They will cost $35.00 or you can use any Hoyt grip.

wisconsin wood butcher · « **Reply #12 on:** March 03, 2010, 06:53:00 PM »

that is great plunger with off the shelf

Spectre · « **Reply #13 on:** March 03, 2010, 06:55:00 PM »

Quote

Originally posted by Blacky:
I have no idea about the cost, yet, but it can be shot off the shelf. It's pretty much like all the other risers with a flat shelf. You can use felt pads from Wal-Mart and put one on the shelf in conjunction with a low berger button. Or you can use two felt pads.
The picture shows, how to fix the pads. I found that pic at the Pirate's forum.

Blacky

Looks to me like a guy could shoot vanes off that(if he really wanted to)

Mocsin1 · « **Reply #14 on:** March 03, 2010, 08:41:00 PM »

I still hadn't figured out who makes that riser. I like the looks of it.

katman · « **Reply #15 on:** March 03, 2010, 09:03:00 PM »

Bowbldr-Bob Morrison-Morrison archery.

Looks very nice. Now I have to decide between the 14 and 16 inch version.

Pat B. · « **Reply #16 on:** March 03, 2010, 11:28:00 PM »

Bob, is it painted or anodized?

Pete W · « **Reply #17 on:** March 03, 2010, 11:51:00 PM »

looks good Bob. The double plunger holes are a nice feature.

Pete

Bob Morrison · « **Reply #18 on:** March 04, 2010, 08:33:00 AM »

Hard Anodized black.I have some that will be camo dipped to customer specs.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: New 16" ILF Riser (Read 283 times)

Users currently browsing this topic: