3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Ground blind hub differences?  (Read 250 times)

Offline VTer

  • Trad Bowhunter
  • **
  • Posts: 1253
Ground blind hub differences?
« on: April 26, 2010, 08:27:00 PM »
I've got a Ground Max Escape Deluxe that's 5 or so years old (before Primos bought them)and the fabric where it attaches to the hub is ripping out. I was just wondering how a double bull type hub is made and how the hub itself attaches (or not) to the fabric. Anybody got any close-up pictures of there hubs?
Logged
Schafer Silvertip 66#-"In memory", Green Mountain Longbow 60#, Hill Country Harvest Master TD 59#

"Some of the world's greatest feats were accomplished by people not smart enough to know they were impossible."
    - Doug Lawson.

Offline VTer

  • Trad Bowhunter
  • **
  • Posts: 1253
Re: Ground blind hub differences?
« Reply #1 on: April 27, 2010, 06:27:00 AM »
ttt
Logged
Schafer Silvertip 66#-"In memory", Green Mountain Longbow 60#, Hill Country Harvest Master TD 59#

"Some of the world's greatest feats were accomplished by people not smart enough to know they were impossible."
    - Doug Lawson.

Offline VTer

  • Trad Bowhunter
  • **
  • Posts: 1253
Re: Ground blind hub differences?
« Reply #2 on: April 28, 2010, 04:28:00 PM »
ttt
Logged
Schafer Silvertip 66#-"In memory", Green Mountain Longbow 60#, Hill Country Harvest Master TD 59#

"Some of the world's greatest feats were accomplished by people not smart enough to know they were impossible."
    - Doug Lawson.

Offline bluegrassbowhunter

  • Trad Bowhunter
  • **
  • Posts: 559
Re: Ground blind hub differences?
« Reply #3 on: April 28, 2010, 05:03:00 PM »
Greg, not sure on the newer DB blinds but mine are the older ones & each place were the hubs are is a tie down eye on the outside of the blind & it's reinforced on the inside of each hub with another kind of material that's alot heavier weight & this prevents the hub from wearing through the blind material....I can get ya some pictures but it may be a couple of days....
Logged
"Life,Liberty & the pursue of deer & turkeys."

Offline ChuckC

  • Trad Bowhunter
  • **
  • Posts: 6775
Re: Ground blind hub differences?
« Reply #4 on: April 28, 2010, 05:08:00 PM »
yeah, the screw / eye at each location unscrews and the hub / rods can be removed and worked on, leaving the material in place with a small hole in it for replacement of the above.
ChuckC
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©