3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Black Widow PHC and long drawlength question  (Read 142 times)

Offline Margly

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1313
Black Widow PHC and long drawlength question
« on: June 14, 2010, 08:57:00 AM »
Hi!
I`ve been looking on the beautiful PHC bows from Black Widow and have a question regarding longer draw lengths:

My draw length is near to 31" and I am wondering if any of you tradgangers with the same draw length shoots the PHC (if so wich bow length)and does it stack or give some kind of finger-pinch?


Thanks
Margly
With a healthy dose of madness and bad memory, life`s a wonderful journey      :thumbsup:    

-----------------------------
TGMM Family of the Bow

Offline Dusty Nethery

  • Trad Bowhunter
  • **
  • Posts: 380
Re: Black Widow PHC and long drawlength question
« Reply #1 on: June 14, 2010, 09:53:00 AM »
Just this weekend I had a chance to handle Flt Rck Shtr's 56" PCH. I have a 30" draw and usually cannot get by with less than a 60" bow. The PCH, however, proved otherwise. I also played around with his buddy's and can say I had absolutely no pinch at my draw length. They draw absolutely smooth.

Good day,

Dusty

Offline Bowmania

  • Trad Bowhunter
  • **
  • Posts: 775
Re: Black Widow PHC and long drawlength question
« Reply #2 on: June 14, 2010, 10:28:00 AM »
I don't get the obsession with short bows and finger pinch and smoothness have nothing to do with it.  Just picture your release hand at full draw with a PCH and (to prove my point) a 70 inch bow.  Viper calls it string angle.  I say think of how much MORE string is on your fingers with a 60 inch bow.  Which bow is going to give you a cleaner release?

Bowmania
I'm not putting up with this guys shit and dogging me.

Offline Dusty Nethery

  • Trad Bowhunter
  • **
  • Posts: 380
Re: Black Widow PHC and long drawlength question
« Reply #3 on: June 14, 2010, 12:05:00 PM »
The "obsession", as you call it, is not that difficult to comprehend.

The tallest blind I have used is 72". While kneeling with a 60" bow I have to be very aware of the amount of cant I need to allow for limb clearance. I don't like to split my concentration any more than neccessary.

Using a hang-on one must be aware of the platform-to-seat cables and the seat itself if a shot is presented anywhere on either side.

If using a ladder stand one must be aware of any side rails and the seat.

So, although I have never hunted with shorter than a 60" bow I can see the benefit of having a well-shooting shorter bow for certain situations.

Offline joevan125

  • Trad Bowhunter
  • **
  • Posts: 1937
Re: Black Widow PHC and long drawlength question
« Reply #4 on: June 14, 2010, 08:16:00 PM »
Margly i have shot both the 58in and the 60 Pch and with your 31in draw the 60in would be a lot more comfortable.

My draw lendth is 30in and i ordered a 58in but that 60in is a little smoother but i just wanted the shortest bow i could shoot well, and the 58in fit me just fine.

By the way that PCH is a rocket launcher and i cant wait to get mine.
Joe Van Kilpatrick

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©