3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: German Ridge Bow Quivers  (Read 329 times)

Offline Snakeeater

  • Trad Bowhunter
  • **
  • Posts: 583
German Ridge Bow Quivers
« on: June 17, 2010, 09:32:00 AM »
I'm looking for an attachable (i.e., no drilling required to mount it) bow quiver for my Fred Bear mag riser take down. The German Ridge quivers look nice, but so do the Kanati and others.

Does anyone have any experience with the German Ridge spring arm quivers? Do they mount solidly to the riser? Do they vibrate or make noise?

Thanks for any insights folks.

Larry
Larry Schwartz, Annapolis, Maryland

Do yourself a favor and join your state bowhunting organization!

Professional Bowhunters Society
Traditional Bowhunters of Maryland
Maryland Bowhunters Society
National Rifle Association

Offline koger

  • Trad Bowhunter
  • **
  • Posts: 1284
Re: German Ridge Bow Quivers
« Reply #1 on: June 17, 2010, 12:47:00 PM »
I won one on the St Judes auction, will have it in a week or so. I will try it out, and let you know. Pm me if I forget. I may sell it, I dont use bow quivers as a rule, just bid to help the kids. If I do sell it, it will be cheap!
samuel koger

Online Burnsie

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2178
Re: German Ridge Bow Quivers
« Reply #2 on: June 17, 2010, 01:02:00 PM »
I love mine.  Pops on and off in a flash and is very quiet.  I use it when walking/stalking,  but pop it off when I'm in my stand.  I prefer shooting without a quiver on my bow if at all possible.
"You can't get into a bar fight if you don't go to the bar" (Grandma was pretty wise)

Offline Curveman

  • Trad Bowhunter
  • **
  • Posts: 1810
Re: German Ridge Bow Quivers
« Reply #3 on: June 17, 2010, 02:00:00 PM »
As Burnsie said. I like the Eagle's flight better for my longbow however.
Compliance Officer MK,LLC
NRA Life Member

Offline Geo S

  • Trad Bowhunter
  • **
  • Posts: 104
Re: German Ridge Bow Quivers
« Reply #4 on: June 17, 2010, 05:05:00 PM »
I have a German Ridge spring arm quiver. It mounts solid and there is no noise.
On and off fast without the sound of velcro.
I take it off when in my stand.

Offline David Bartholomew

  • Trad Bowhunter
  • **
  • Posts: 563
Re: German Ridge Bow Quivers
« Reply #5 on: June 18, 2010, 12:04:00 AM »
Larry, I own both.

I have two German Ridge quivers and one Kanati Pro Angle quiver and - like most things – each has their place. The decision you have to make is, "What is your priority… what purpose is #1 to be met?"

If you're going to be stump shooting/walking, or 3D... then I feel the Kanati is the best, bar none!  I like the quivers and I like the gent who makes 'em.  

Now, the Kanati bow quiver for tree stand hunting / take on and off?  Well, all I can tell you is that when those knobs fall from 20 feet up (yes, I have "FFS" (aka - Fumble Finger Syndrome)... well, the knobs are hard to find... sometimes, but there isn’t a lot of noise when they hit.

As for me when I treestand hunt... I want something quick on and off because I hang my bow quiver on a hook next to me. If you’re like me, I suggest you go with the German Ridge.

Now, shooting with a German Ridge as you walk / stalk?  I tried it before, and I don't recommend it.  Yes, the GR does clip on and does stay on, but it sits out to far.  To me, the balance between the bow and the quiver... well, awkward.

Noisy?   If noise bothers you... go Kanati, period, NO DISCUSSION.

Just my opinion.
WTCS(SW/DV)  USN Retired

Offline PICKNGRIN

  • Trad Bowhunter
  • **
  • Posts: 879
Re: German Ridge Bow Quivers
« Reply #6 on: June 18, 2010, 08:48:00 AM »
I agree with Dave above.  A good quiver if you want to remove it on stand.  Loaded with arrows, it does seem to throw off the balance of the bow.  I thought it was kind of noisy too.

Online cacciatore

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8320
Re: German Ridge Bow Quivers
« Reply #7 on: June 18, 2010, 09:31:00 AM »
I third the 2 previous post.The German Ridge is very well constructed but way to heavy on a light weight bow,I planned to use it on my Bear TD too,but it weight more than the bow itself.The inspiring design was the original Bear quiver that worked well also if a little bit noisy.
1993 PBS Regular
Compton
CBA
CSTAS

Offline Shakes.602

  • Trad Bowhunter
  • **
  • Posts: 3643
Re: German Ridge Bow Quivers
« Reply #8 on: June 18, 2010, 09:36:00 AM »
KANATI  is My Quiver of Choice! (When I Can Afford One...) They just look Great!! I am currently Shooting a 4 Arrow Eagles Flight, and It Does The Job Just Fine!! Also......   :archer:   I have 2 Leather and a Soft-Kote Selways, from My Beginnings of Bow Quivers!! 6 or 8 whichever.   :archer:
"Carpe Cedar" Seize the Arrow!
"Life doesn't get Simpler; it gets Shorter and Turns in Smaller Circles." Dean Torges
"Faith is to Prayer what the Feather is to the Arrow" Thomas Morrow
"Ah Think They Should Outlaw Them Thar Crossbows" A Hunting Pal

Offline Buckwheaties

  • Trad Bowhunter
  • **
  • Posts: 411
Re: German Ridge Bow Quivers
« Reply #9 on: June 18, 2010, 10:05:00 AM »
KANATI is the best I've ever used!!! Good, well thought out, perfect fit, light weight, secure, beautiful leather, and to top all of that, good people...
"Don't listen to what they say, watch what they do."

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©