3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Can it be done?  (Read 468 times)

Offline deertraks

  • Trad Bowhunter
  • **
  • Posts: 684
Can it be done?
« on: May 10, 2007, 09:27:00 AM »
Guys, I have a chance to get a PSE Kudu cheap. Here is my question. Can I take that bow riser and reduce the size of the grip and slim the riser down a bit? I don't like the bulk of the grip.
Dave
Dave
Phil. 2:6-11

Offline ALW

  • Trad Bowhunter
  • **
  • Posts: 392
Re: Can it be done?
« Reply #1 on: May 10, 2007, 09:38:00 AM »
I had a PSE Blackhawk at one time.  My first trad. bow.  I believe it is pretty similar to the Kudu.  It also had a really beefy grip and I reduced it down some to make it a little smaller.  I didn't take anything off of any other part of the riser, just the grip.  Never seemed to affect it any.

Aaron

Offline insttech1

  • Trad Bowhunter
  • **
  • Posts: 447
Re: Can it be done?
« Reply #2 on: May 10, 2007, 10:08:00 AM »
Yup, no problem...just don't take it way too thin to affect the integrity of the bow...

Re-sand and spray with a can of Helmsman Spar Urethane from Home Depot in about 6 light coats of satin, and you're all done!!
"When you catch Hell--DROP IT!!  When you're going thru Hell--DON'T STOP!!"

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©