3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: tuning question  (Read 315 times)

Offline Andy Cooper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 915
tuning question
« on: July 13, 2010, 12:29:00 PM »
Although I've spent a lot of time with traditional equipment, I've only recently begun to seriously contemplate tuning it properly. Most of my experience is just stump and target shooting for fun. I used to shoot 60# recurves, but have dropped back to 50#@28". I have a couple hundred cedar shafts spined 70-74#. What weight range points should I try to get them to move back to the right, as they shoot about 3-4" left at 15 yards?

Or, would I be better served to sell the shafts and purchase lower spined ones? I've decided to begin (again) to hunt with my recurves, but will not do so unless I can be assured my equipment is shooting where I'm looking! Thanks.
:campfire:       TGMM Family of the Bow       :archer:      

My Father's bow rack is the sky.

Offline Andy Cooper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 915
Re: tuning question
« Reply #1 on: July 13, 2010, 01:51:00 PM »
I just realized the information I provided about didn't was incomplete. I'm presently shooting 125 grain points.
:campfire:       TGMM Family of the Bow       :archer:      

My Father's bow rack is the sky.

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: tuning question
« Reply #2 on: July 13, 2010, 02:00:00 PM »
Andy:  160 grain points just might do it.  Might you be able to flatten the strike plate some?  If there's a toothpick behind the leather, try removing it, or if it's just a thick piece of leather, try replacing it with a thinner one.  I don't think you'll need much in either case.  I shoot 70-75# spined cedars out of my 52# Bear T/D.  Good luck.

Offline MSwickard

  • Trad Bowhunter
  • **
  • Posts: 299
Re: tuning question
« Reply #3 on: July 13, 2010, 02:13:00 PM »
Get the point weight up to 160-175 and you should be in the game.  Probably shoot them around 31".

Really can't say until you try them out with heavier heads.

Mike

Offline Andy Cooper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 915
Re: tuning question
« Reply #4 on: July 13, 2010, 04:25:00 PM »
Thanks guys.
:campfire:       TGMM Family of the Bow       :archer:      

My Father's bow rack is the sky.

Offline Andy Cooper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 915
Re: tuning question
« Reply #5 on: July 17, 2010, 11:22:00 PM »
I ordered some weights from 3R...75, 100, and 125 grains. I'll see which one gives me the best arrow flight and go from there. This should prove to be interesting.
:campfire:       TGMM Family of the Bow       :archer:      

My Father's bow rack is the sky.

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: tuning question
« Reply #6 on: July 17, 2010, 11:59:00 PM »
Depends on the bow and how center cut the riser is. Most modern RC or R/D bows of 50# will need that spine with a HPME string. If it does not work I will gladly buy them.

Offline Andy Cooper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 915
Re: tuning question
« Reply #7 on: September 08, 2010, 06:07:00 PM »
I ran some 70-75# douglas fir arrows through my NTM Habu Viperkahn(50@28 & cut 1/8" past center) today. All 8 arrows had 125 gr points, but 2 also had 75 gr woody weights, 2 had 100, and 2 had 125 grainers added. The heaviest ones weighed 700 grains. I plan on running them through my chrony this weekend. Anyway, the ones with 250 grains up front actually shot the best. Whodathunkit?!
:campfire:       TGMM Family of the Bow       :archer:      

My Father's bow rack is the sky.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©