Author Topic: brass inserts and glue on/glue in adapters with PDP weights??? (Read 326 times)

ozy clint · « **on:** January 20, 2011, 04:02:00 AM »

will the PDP weight system work with the 50gr & 100gr brass inserts?

will they work with the brass glue on/glue in adapters that 3 rivers stocks?

thanks.

BigJim · « **Reply #1 on:** January 20, 2011, 06:55:00 AM »

No Ozy, they won't. You can however drill the back out and thread it and they will work. I have been speaking with gold tip and they are coming out with a brass insert that is supposed to accept the threaded adapters. they have them in the gold tip catalogue, just not available for resale yet. These should work for other shafts as well.

Bigjim

Paul Mattson · « **Reply #2 on:** January 20, 2011, 07:07:00 AM »

Gold Tip makes an adapter that will screw into the back of the inserts. They come in 10, 20, and 50 grns. I have used them in AD Brass Inserts, and 5/15" 50, 100grn. No need to use the PDP system. http://goldtip.com/componentlanding.aspx?page=3

News:

Author Topic: brass inserts and glue on/glue in adapters with PDP weights??? (Read 326 times)

ozy clint

brass inserts and glue on/glue in adapters with PDP weights???

BigJim

Re: brass inserts and glue on/glue in adapters with PDP weights???

Paul Mattson

Re: brass inserts and glue on/glue in adapters with PDP weights???

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS