Author Topic: Help with fiberglass coming off of Kodiak. (Read 385 times)

stick-um · « **on:** February 07, 2011, 06:34:00 PM »

I screwed up the finish on my Bear Kodiak. The bow had some trebark camo tape on the limbs and when I took it off it pulled the fiberglass off in some places. Can it be redone or should I just put some other type of cover over it so I don't see it. Is it ok to shoot this way. I'll try to post a pic when I get home.

recurvericky · « **Reply #1 on:** February 07, 2011, 07:22:00 PM »

Can you post pictures?

Whip · « **Reply #2 on:** February 07, 2011, 07:37:00 PM »

Pictures would really help. Are you sure it is the fiberglass coming up and not just the finish? Even if it is just the finish, it does need to be dealt with to prevent more problems down the road, and just covering it with more tape won't necessarily solve your issue.

Robertfishes · « **Reply #3 on:** February 07, 2011, 08:30:00 PM »

Are you saying you pulled some fiberglass splinters off of the limb edges? 3 years ago I was told when pulling tape off of a bow start at riser and pull tape off towards the limb tips..so far this has worked for me when pulling tape off of the limbs after shaping the limbs. Whip has a lot of experiance fixin bows

News:

Author Topic: Help with fiberglass coming off of Kodiak. (Read 385 times)

stick-um

Help with fiberglass coming off of Kodiak.

recurvericky

Re: Help with fiberglass coming off of Kodiak.

Whip

Re: Help with fiberglass coming off of Kodiak.

Robertfishes

Re: Help with fiberglass coming off of Kodiak.

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS