Author Topic: Heritage 150 shafts-toughest on the planet? (Read 496 times)

oldbohntr · « **Reply #20 on:** March 22, 2011, 12:34:00 AM »

2216 shaft epoxied and/or knurled to the outside helps them when you hit a rock face, or something like it! An inch of 2216, chamfered on the back end, weighs about 12 grains.

cacciatore · « **Reply #21 on:** March 22, 2011, 05:32:00 PM »

they are super shaft,very consistent in spine and weight,durable and tough.I am been using them for 3 years now and i prefere them much more than the GT.I would like to fid them in size 450.Most of the one I have destroyed were with Robin Hoods,or some missing against a 2"hard steel wall that I use to stop the bullets of my 300 Whaterby Mag.I had a couple browen by some 100# plus boars as well.They are still the arrow I like the most.

Randy Morin · « **Reply #22 on:** March 22, 2011, 05:42:00 PM »

I got 2 dozen shafts coming as we speak. Looking forward to using these. I have the 250's coming. Hope they work for me spine wise. It was tough to decide 150 or 250 as I was splitting the diff.

cacciatore · « **Reply #23 on:** March 22, 2011, 06:15:00 PM »

Randy i don't know what is your poundage but for sure the 250 will help you in the elk woods.

Izzy · « **Reply #24 on:** March 22, 2011, 06:25:00 PM »

Better than Beman MFX??? Who has used both shafts that can compare the two? I love the MFX but have been contemplating trying a new shaft out.

Notso · « **Reply #25 on:** March 22, 2011, 07:13:00 PM »

I have what is left of a dozen- and agree they are tough. My only issue is they are prone to loss as I launch them into the woods past the 3D targets !!!

18thcentman · « **Reply #26 on:** March 22, 2011, 08:50:00 PM »

They work for me! I re-fletched a few, and still have 11 left from the first dozen. Lost one to a poor shot.

Matt Z · « **Reply #27 on:** March 23, 2011, 06:07:00 PM »

I have a 150 and 250 test shaft for a month now. Don't know where to start... Want to shoot 20+% FOC. Many concerns... fractures, taking the insert out/in adding subtracting weight to get them to fly, crown dipping, broadhead alignment once insert is glued for good ect. 55lb BW 2018's w 145's currently. Anyone from Scguylkill County PA? I'll be right over. Matt

Wampus · « **Reply #28 on:** March 23, 2011, 06:29:00 PM »

Been shooting 30" 250's with brass inserts and 125 gr tips. Fly great out of my bows from 50-60#

LoweBow · « **Reply #29 on:** March 23, 2011, 06:54:00 PM »

I'm fletching a brand new doz. 250's rt now. My 150's have been thru hell and back over the last year. Great arras fosho!

DBinAlamo · « **Reply #30 on:** March 23, 2011, 09:30:00 PM »

I had awesome luck w/ my 150's, super tough but my Axis 400's are giving them a run for the money.....DB

Bow Bum · « **Reply #31 on:** March 23, 2011, 09:42:00 PM »

I've done pretty mean things to those cheap CX arrows. They sure can take a beating...

News:

Author Topic: Heritage 150 shafts-toughest on the planet? (Read 496 times)

oldbohntr

Re: Heritage 150 shafts-toughest on the planet?

cacciatore

Re: Heritage 150 shafts-toughest on the planet?

Randy Morin

Re: Heritage 150 shafts-toughest on the planet?

cacciatore

Re: Heritage 150 shafts-toughest on the planet?

Izzy

Re: Heritage 150 shafts-toughest on the planet?

Notso

Re: Heritage 150 shafts-toughest on the planet?

18thcentman

Re: Heritage 150 shafts-toughest on the planet?

Matt Z

Re: Heritage 150 shafts-toughest on the planet?

Wampus

Re: Heritage 150 shafts-toughest on the planet?

LoweBow

Re: Heritage 150 shafts-toughest on the planet?

DBinAlamo

Re: Heritage 150 shafts-toughest on the planet?

Bow Bum

Re: Heritage 150 shafts-toughest on the planet?

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS