Steel broadhead adapter users ?

[VTer]

So I don't hijack another thread, I started my own. To guys that use these, do you also use them with your other type points (field, judu,blunt, etc.)to keep the weights the same? Or do you use other methods?

[reddust]

I use 75gr adapters in my 125gr Woodsman broadheads and use 200gr screw in field tips..Works great.

[Stickbow]

I use 100 grain steel adapt....

Yes I glue them in hammer heads, feild points and my broadheads

[Gottabow]

I try to keep it all the same..I will use a screw in point of the same weight as the broadhead and steel adaptor.  125gr adaptor + 125gr Broadhead= 250gr...I then just use a 250gr screw in point.

[LKH]

I like the brass adaptors.  With the steel, if you get them wet and forget them too long, the rust can be a devil to break free.

[JimB]

I use whatever works.If there is a screw on field point the exact weight I need,I use that.I often need an odd weight so then I use the adapter and appropriate weight glue on field point.I can further customize the weight by adding lead bird shot in the front of the point ferrule or on the hollow cavity of the adapter or both.

[Jack Whitmire Jr]

I use  100 grains, I then use a screw in 225 grain field point to practice with also.

[jon boy]

I use both 75 and 100 grains on my broadheads depending on their grain weight with no adapters.

[rdoggsilva]

I use a 125gr Eskimo b/h with a 75gr steel adapter and shoot a 200gr field tip.

[Steve O]

Yes.

250g screw in field point

125/35g Judo/Ace Hex/magnus blunt + 125g adapter

125g Woodsman + 125g adapter

160g Snuffer + 100g adapter