3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Limbsavers for recurves  (Read 187 times)

Offline Dave Paradowski

  • Trad Bowhunter
  • **
  • Posts: 125
Limbsavers for recurves
« on: April 19, 2011, 08:09:00 AM »
Does anyone use or have used the Limbsaver Ultra on their recurve bows? I have several questions. Are they very effective as silencers? I saw them mounted on the fadeouts on the belly side of the bow. Are they the most effective located there? And finally, how hard are they to remove without harming the finish of the limb?
Thanks in advance for the reply.....DaveP

Offline magnus

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3550
Re: Limbsavers for recurves
« Reply #1 on: April 19, 2011, 08:50:00 AM »
I did on a K-mag that I have but once I learned how to tune the bow properly and had the right arrows I didn't need them and took them off. Used WD-40 to remove adhesive and rubbing alcohol to remove that. They did help with limb vibration but not really sure if they helped or hurt bow performance.
Keeping the Faith!
Matt
TGMM Family of the bow
 Turkey Flite Traditional  
[email protected]

Offline Bowwild

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5433
Re: Limbsavers for recurves
« Reply #2 on: April 19, 2011, 09:54:00 AM »
I tried em and took them off.

Offline GRINCH

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4662
Re: Limbsavers for recurves
« Reply #3 on: April 19, 2011, 10:03:00 AM »
With string silencers and proper tuning didn't need them.
TGMM Family of The Bow,
USN 1973-1995

Offline Swamp Yankee

  • Trad Bowhunter
  • **
  • Posts: 636
Re: Limbsavers for recurves
« Reply #4 on: April 19, 2011, 12:05:00 PM »
I have a BW that needs them to dampen a high pitch ring in the limbs.  Works best installed at the end of the limbs, 1" under the string as per instructions.  They didn't do much of anything on this particular bow when located on the fadeouts.
"The pessimist complains about the wind; the optimist expects it to change; the realist adjusts the sails."
- William Arthur Ward
Black Widow PSAV 42#@29
Collection of Red Wing Hunters
Northern Mist Superior 43#@28
Blue Ridge Snowy Mt 51#@30"

Offline JL

  • Trad Bowhunter
  • **
  • Posts: 725
Re: Limbsavers for recurves
« Reply #5 on: April 19, 2011, 12:24:00 PM »
Never use em and personally don't have a use for em. If I can't get a bow to quiet down via tuning, it's going down the road....

Kinda like having to put a lime in your beer to make it taste decent, just not happening, I'll choose something else.

Nothing personal, just how I roll...
Practice like you are the worst, shoot like you are the best...

Offline Lee Robinson .

  • Trad Bowhunter
  • **
  • Posts: 727
Re: Limbsavers for recurves
« Reply #6 on: April 19, 2011, 12:41:00 PM »
PERSONALLY...I wouldn't want a bow that needed something like that on it. Part of the reason I got into traditional archery was so I could "keep it simple" and wouldn't need to deal with attachments.

I do not try to speak for others. Do what works for YOU.
Until next time...good shooting,
Lee

Offline ron w

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 13848
Re: Limbsavers for recurves
« Reply #7 on: April 19, 2011, 12:48:00 PM »
I have them on several bows and they seem to dampen some vibration. I think they work best on more modern high performance bows, like the aggressive R/D longbows. That's just my experience. Most times on an average bow I can get it to be almost silent with tuning and a heavy arrow.But if you feel that it works on your bow.....go for it!
In the beginner's mind there are many possibilities. In the expert's there are few...So the most difficult thing is always to keep your beginner's mind...This is also the real secret of the arts: always be a beginner.  Shunryu Suzuki

Offline olddogrib

  • Trad Bowhunter
  • **
  • Posts: 1365
Re: Limbsavers for recurves
« Reply #8 on: April 19, 2011, 01:58:00 PM »
TBH magazine did and test several years back that found they were much more effective mounted as Swamp Yankee describes, with a loss of only one or two fps.  SIMS recommends this location also.  I'd use them if I needed them, but nobody else must have read that article, because I see very few mounted that way.  Not particularly trad looking but to me "beauty is as beauty does".  Or as somebody's tag line reads...."speed doesn't kill, quiet kills"!
"Wakan Tanka
 Wakan Tanka
 Pilamaya
 Wichoni heh"

Offline Dave Paradowski

  • Trad Bowhunter
  • **
  • Posts: 125
Re: Limbsavers for recurves
« Reply #9 on: April 21, 2011, 09:46:00 AM »
Thanks again for the replies..DaveP

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©