3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: selfbow question  (Read 573 times)

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1319
selfbow question
« on: June 21, 2007, 06:36:00 PM »
Hi guys, I'm new and not really sure how many of you guys have built selfbows but anyway I have a question about a seflbow I built last winter. I built a 55# maple selfbow unbacked. And it has been shot quite a few times. But I think it may have developed what you call chrysals near the handle. All of the books I have read say chrysals develope in the early stages of a bows life but this bow has been shot a lot and Ive just now started to notice them. Any information about this would be much apreciated.-Thanks

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: selfbow question
« Reply #1 on: June 21, 2007, 10:23:00 PM »
Chrysals can develop at any time as the belly wood fatigues.

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1319
Re: selfbow question
« Reply #2 on: June 22, 2007, 08:14:00 AM »
Should I plan on this bow breaking soon or can it hold up as long as the chrysals remain minimal?

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: selfbow question
« Reply #3 on: June 22, 2007, 09:18:00 AM »
Do they look something like this?  Eric is right.  I have had them develop after many thousands of shots on bows.  I consider them a terminal disease but life expectancy varies.  
Take a kid hunting!

TGMM Family of the Bow

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1319
Re: selfbow question
« Reply #4 on: June 22, 2007, 03:08:00 PM »
Similar to those on your bow, but not as long and all traveling in the same direction, in about a two inch long spot near the handle.

Offline Dave2old

  • Trad Bowhunter
  • **
  • Posts: 779
Re: selfbow question
« Reply #5 on: June 22, 2007, 06:57:00 PM »
If you love the bow enough, you can flatten the back and add a real backing, like bamboo or thin hickory, then tiller the belly to bring it back to weight and delete the faults. Of course, you then have a lam bow, not a selfbow, but at least you still have a bow. dave

Offline Linc

  • Trad Bowhunter
  • **
  • Posts: 639
Re: selfbow question
« Reply #6 on: June 23, 2007, 04:38:00 AM »
Buckeye, You can shave material away from above and below the chrysals to relieve the compression that is building in that area.This will spread out the area that is working.

Is the bow flat bellied or rounded.Round bellied will have more of a tendency to chrysal.Flat bellied would indicate the area on either side may be slightly stiffer.
Lincoln E. Farr

Offline gordonf

  • Trad Bowhunter
  • **
  • Posts: 216
Re: selfbow question
« Reply #7 on: June 23, 2007, 04:26:00 PM »
If the frets are limited to a relatively small area you can cover it with a rawhide patch and then wrap the works with serving thread. I learned this technique from John Strunk and have had good sucess with it.

Offline kirkwhitehead

  • Trad Bowhunter
  • **
  • Posts: 147
Re: selfbow question
« Reply #8 on: June 23, 2007, 10:34:00 PM »
the ones on my bow look more like a crease in a pair of pressed pants.kind of buckled up.

so is the popular thought on this "keep shooting"?

kirk
kirk

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1319
Re: selfbow question
« Reply #9 on: June 24, 2007, 04:16:00 PM »
The ones on my bow look just like the ones on yours but they are in only about a 2 inch area on the belly and are all going downward and to the left, and begin right after the fadeouts of the handle.

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1319
Re: selfbow question
« Reply #10 on: June 24, 2007, 04:24:00 PM »
Sorry guys I didnt realize it until now that my dad must have been on here and I just posted the exact same thing he posted in reply to Johns picture.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©