3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Arrow help for #50 Recurve  (Read 207 times)

Offline Dryfired

  • Trad Bowhunter
  • **
  • Posts: 62
Arrow help for #50 Recurve
« on: April 30, 2011, 07:37:00 AM »
I shoot 52# at 28.5". My present arrows are Easton Gamegetter 400's cut to 30". I have been using 125g broadheads and a 15g insert.

I am almost out of arrows so I need new ones but don't like the fat Gamegetter diameter. have been thinking about returning to carbon arrows to reduce shaft diameter. I would also like to increase my FOC by using a heavier insert with the same 125g broadheads. Any suggestions as to what I might try would be very much appreciated. I am after a reasonable heavy arrow.

Thanks!
Go placidly

Offline macksdad

  • Trad Bowhunter
  • **
  • Posts: 619
Re: Arrow help for #50 Recurve
« Reply #1 on: April 30, 2011, 07:40:00 AM »
I shoot gamegetter xx75 2016 aluminum shafts with 5" sheild cut fletching and 100 gr tip my shafts are 29.5" NG to BOP. They shoot great out of my 50# bow but are noisy  out of my 55# bow. I think you would have good luck with them.
Hoyt Buffalo   #45@28,#50@28, #55 @28, #60@28
Hill Country Wildcat 52#@28
Hill Country Wildcat Static #57@31
Rick Welch Accuracy Factory

Offline Bud B.

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 7289
Re: Arrow help for #50 Recurve
« Reply #2 on: April 30, 2011, 07:48:00 AM »
My bow pull is nearly identical to yours.

Bear Super Grizzly 50@28 but I'm drawing 29" +/-.

I shoot GT Trads 3555s at full length with 12gr alum insert and 145 field point off the shelf. these arrows fly straight and true out of the recurve.

PM sent.
TGMM Family of the Bow >>>>---------->

"You can learn more about deer hunting with a bow and arrow in a week, than a gun hunter might learn all his life." ----- Fred Bear

Offline Reaper TN

  • Trad Bowhunter
  • **
  • Posts: 563
Re: Arrow help for #50 Recurve
« Reply #3 on: April 30, 2011, 08:27:00 AM »
I shoot 50 pounds at 28 inches draw with the recurve that I hunt with.  GT Trad 5575's 30 inches long with 200 grains up front bareshaft perfect for me. Total arrow weight is about 500 grains.
TT Pinnacle II  45# 62"
Hoyt Excel  50# 64"

Offline legends1

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1793
Re: Arrow help for #50 Recurve
« Reply #4 on: April 30, 2011, 12:36:00 PM »
I think you would really like the AD lites.They would shoot very with your set up.

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Arrow help for #50 Recurve
« Reply #5 on: April 30, 2011, 12:57:00 PM »
Need more info!! Recurve or LB is it high performance, cut past center, FF string all that would help. I would say a CE heritage 150 cut to 29.5"s and a 50 grain brass insert and 125 grain head, this flies perfect out of all my high performance recurves that are cut past center and they are betweem 52-54#s at my 28.5" draw. Shawn
Shawn

Offline huntingarcher

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1020
Re: Arrow help for #50 Recurve
« Reply #6 on: April 30, 2011, 01:28:00 PM »
x2 on the Gold Tips.
IF MONEY TALKS MINE SAYS GOODBY

Offline owlbait

  • Trad Bowhunter
  • **
  • Posts: 4774
Re: Arrow help for #50 Recurve
« Reply #7 on: April 30, 2011, 03:23:00 PM »
ST Axis 500, 75 grain insert, 125 grain point, full length, 7" wraps, 3 5" feathers. Heavier point weight will probably work too.
Advice from The Buck:"Only little girls shoot spikers!"

Offline Dryfired

  • Trad Bowhunter
  • **
  • Posts: 62
Re: Arrow help for #50 Recurve
« Reply #8 on: April 30, 2011, 06:13:00 PM »
Thanks very much for all your help guys! There are a few great arrow combinations suggested here. Now I need to choose one...  :)

The bow is a recurve shooting about 195ft/s with a dacron string. I don't know what arrows were used to measure the speed from this bow but can find out. I have a second 50# recurve bow but am not sure of the string type or chrono readings.

Thanks again everyone!
Go placidly

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©