3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Easton Arrows  (Read 369 times)

Offline JM

  • Trad Bowhunter
  • **
  • Posts: 14
Easton Arrows
« on: June 25, 2007, 01:48:00 PM »
Is the arrow chart accurate?

Offline mike g

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 2301
Re: Easton Arrows
« Reply #1 on: June 25, 2007, 01:52:00 PM »
No....
It's just a starting point....
"TGMM Family of the Bow"

Offline JM

  • Trad Bowhunter
  • **
  • Posts: 14
Re: Easton Arrows
« Reply #2 on: June 25, 2007, 01:55:00 PM »
Could someone offer me a suggestion then...I'm using the Samick Predator [60 @ 28"]with a draw of 26.5.  Before I spend anymore money on arrows, could someone suggest an arrow fron Easton?

The arrows I buy for my ELB are custom I've never had to figure out the shaft numbers before.


Thank you.

Offline BMN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1648
Re: Easton Arrows
« Reply #3 on: June 25, 2007, 02:20:00 PM »
Try this. It should be a lot closer than the Easton charts.

 http://www.arrowsbykelly.com/Spine_Charts.html
Compton Traditional Bowhunters
Professional Bowhunters Society
Prairie Traditional Archers
TGMM Family of the Bow

The most frightening thing you are likely to encounter in nature is yourself.

Offline JM

  • Trad Bowhunter
  • **
  • Posts: 14
Re: Easton Arrows
« Reply #4 on: June 25, 2007, 02:42:00 PM »
Thank you.

Offline RySanpei

  • Trad Bowhunter
  • **
  • Posts: 52
Re: Easton Arrows
« Reply #5 on: June 25, 2007, 02:51:00 PM »
Are you planning on using carbons or aluminum?  How much weight are you planning on using at the tip?
Did you scale your bow at 26.5? I'm guessing you pulling about 56, 57 pounds?

Offline JM

  • Trad Bowhunter
  • **
  • Posts: 14
Re: Easton Arrows
« Reply #6 on: June 25, 2007, 07:55:00 PM »
There isn't a traditional archery club or archery store in my area and closest one I have yet to visit but do plan on it.  This forum has been a blessing, thanks guys.

I'm going to use aluminum, I have tips that weight 100 and 125 grains, scaled by bow at 26.5 and as for the pull weight, don't know.

I have ELB arrows, traditional English style longbow arrows with a grain weight of 600.  Would they work or are they too big?  

Thanks,

j

Offline TRADITIONAL ONLY

  • Trad Bowhunter
  • **
  • Posts: 225
Re: Easton Arrows
« Reply #7 on: June 26, 2007, 11:56:00 AM »
10 grains per pound of bow weight, they would work great...
If its brown its down; thats my motto.


"The great questions of the day are decided... by blood and iron"  Otto von Bismark

Offline bjk

  • Trad Bowhunter
  • **
  • Posts: 514
Re: Easton Arrows
« Reply #8 on: June 26, 2007, 12:11:00 PM »
Pick up some 2018's.

The weight of the arrow has nothing to do with whether they will work, the spine of the arrow is the important factor.

Offline jonesy

  • Trad Bowhunter
  • **
  • Posts: 353
Re: Easton Arrows
« Reply #9 on: June 26, 2007, 01:10:00 PM »
Easton axis 400 or 500 depending on what weight tip you will shoot, soften or stiffen shaft with tip.I would lean more twords the 500 with .50" deflection, thats what i shoot and they shoot great outa my 60lb bow.jonesy

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Easton Arrows
« Reply #10 on: June 26, 2007, 06:51:00 PM »
Guys please do not give arrow advice unless you are sure. Jonesy is correct about the 500s, but you will need to add some weight to the point or leave them a bit long and bjk is correct on the 2018s. I am sorry but I see guys telling people to shoot this or that and they have no clue as to what they are talking about. The original question is yes they are very accurate but based on compound bows as they are based on 14" centers. Shawn
Shawn

Offline JM

  • Trad Bowhunter
  • **
  • Posts: 14
Re: Easton Arrows
« Reply #11 on: June 27, 2007, 11:17:00 AM »
Thanks guys, your posts have helped.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©