Author Topic: brace height for short recurves. (Read 260 times)

Bladepeek · « **on:** July 17, 2011, 05:17:00 PM »

I know e-B.. items are not for posting here, but I'd like some help from short bow shooters on one I'm looking at. Can this possibly be a correct brace height?
http://cgi.****.com/ws/****ISAPI.dll?ViewItem&item=320728716473&ssPageName=STRK:MEWAX:IT

Ari · « **Reply #1 on:** July 17, 2011, 06:00:00 PM »

I'm no expert but I do own a 52" k-mag and to me that bow looks like the brace height is a lot higher than what my k-mag would be at. I would suggest you buy a new string for any used bow you buy.

TxAg · « **Reply #2 on:** July 17, 2011, 06:00:00 PM »

It looks a little funny, but I blew the picture up and measured. I came up with and 8" brace using the riser as a reference...I assumed the riser was about 2" wide.

TxAg · « **Reply #3 on:** July 17, 2011, 06:00:00 PM »

double post

Bladepeek · « **Reply #4 on:** July 17, 2011, 06:42:00 PM »

Thanks guys. Guess picture angles can be deceiving. Somewhere around 7.5 - 8" then would be a reasonable starting point then? My 60" braces well at 7 5/8, but that pic looked like a foot!
Thanks agin.
Ron

The Whittler · « **Reply #5 on:** July 17, 2011, 09:34:00 PM »

Start at 7" and go from there.

the elf · « **Reply #6 on:** July 19, 2011, 01:08:00 PM »

My K-mags both like a brace height of 8 to 8 1/2 inches.

News:

Author Topic: brace height for short recurves. (Read 260 times)

Bladepeek

brace height for short recurves.

Ari

Re: brace height for short recurves.

TxAg

Re: brace height for short recurves.

TxAg

Re: brace height for short recurves.

Bladepeek

Re: brace height for short recurves.

The Whittler

Re: brace height for short recurves.

the elf

Re: brace height for short recurves.

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS