3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Aluminum arrow choices  (Read 347 times)

Offline abbatoys

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 369
Aluminum arrow choices
« on: July 17, 2011, 09:23:00 PM »
I am shooting a Predator Recurve 52 lb @ 28" draw. I am right about 28 inch draw and shooting a 30" arrow. A 2114 at 30" with a 150 gr head seems to fly real good. I havent been able to bare shaft it, but the arrow flight is good. My scale is broke (new one on order), but wondering if this is a good hunting arrow to use. Is it enough gpi..???? Thanks, Scott
62" Thunderstick Moab  52lb @ 28"
60" Bear Takedown 45lb @ 28"
60" Bear 59'er 45lb @ 28"

Offline Jake Diebolt

  • Trad Bowhunter
  • **
  • Posts: 412
Re: Aluminum arrow choices
« Reply #1 on: July 17, 2011, 10:55:00 PM »
According to stu's calc, the arrow weight comes in at around 9-10 gpp, not sure about fletching and insert weigth, etc. Enough gpp, not sure about the spine.

Offline bigbadjon

  • Trad Bowhunter
  • **
  • Posts: 1472
Re: Aluminum arrow choices
« Reply #2 on: July 18, 2011, 01:24:00 AM »
If it flys good shoot it. I shoot 2114s W/125 gr out of a 60# JH Jet so I belive your setup is about accurate.
Hoyt Tiburon 55#@28 64in
A&H ACS CX 61#@28in 68in (rip 8/3/14)

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Re: Aluminum arrow choices
« Reply #3 on: July 18, 2011, 07:48:00 AM »
The overall weight of the 2114 with a 150 grain point weight should be around 499 grains which will give you a 9.59 GPP (grains per pound) arrow.

The above stats are predicated on you shooting an Easton Camo Hunter arrow with a 25 grain RPS insert, a metal Super Uni Bushing weighing 7 grains and installed with factory Easton Super Nocks weighing 13 grains.

Should be traveling around 189 fps in speed.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Offline Blackhawk

  • Trad Bowhunter
  • **
  • Posts: 3863
Re: Aluminum arrow choices
« Reply #4 on: July 18, 2011, 06:25:00 PM »
That's a good arrow, but it is my second choice behind the 2016 which has comparable weight and has a lesser diameter.  

At that bow weight and arrow length, even the heavier 2018 would be worth looking at if heading out after game bigger than deer.
Lon Scott

Offline abbatoys

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 369
Re: Aluminum arrow choices
« Reply #5 on: July 18, 2011, 06:49:00 PM »
Just a whitetail hunter, but I have thought about trying out a couple 2018's. The 2114 was a lazer and so was a 2115. Scott
62" Thunderstick Moab  52lb @ 28"
60" Bear Takedown 45lb @ 28"
60" Bear 59'er 45lb @ 28"

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Re: Aluminum arrow choices
« Reply #6 on: July 18, 2011, 11:08:00 PM »
Keep this in mind. Unless you have a large supply of 2115s on hand, Easton discontinued the 2115 size some years ago.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Offline abbatoys

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 369
Re: Aluminum arrow choices
« Reply #7 on: July 19, 2011, 10:35:00 AM »
Luckily there is a small sport shop close by that still has arrows in there from the 70's (probably not really) and I can find most sizes, just need to strip off vanes...
62" Thunderstick Moab  52lb @ 28"
60" Bear Takedown 45lb @ 28"
60" Bear 59'er 45lb @ 28"

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©