First time 4 blade user

[Chub]

For awhile now i used 2 blade eskimoes .i got some 4blades a denton hill.i have a good set up meaning fps and bhs shoot the same from 10 to 30yrds .i like my shots 20 and under bow weight is 52at my 27.5 draw . question is on the small blades do i sharpen both sides or just one side . im not trying to sound stupid but out of the package only one side is ground.

[bolong]

I sharpen mine on both sides.

i only do one side but it cant hurt to do both sides.

[Orion]

I do both sides.

[KodiakMag]

I do both. Just put it where it needs to and it will take care of itself.

[Charlie Lamb]

Chub... I always sharpened mine on the side that was ground and just brush off the burr from the other side. No need to overdue the metal removal on the small blades.

[Terry Green]

What Charlie said....if you don't hit a couple of licks on the other side...you will be shooting the bleeders with a burr and no where near as sharp.

Go to the how to forum and check out the clips I did on sharpening bleeder blades.