3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: KME Grizzly BH's - Inventory....  (Read 222 times)

Offline Trad-Man

  • Trad Bowhunter
  • **
  • Posts: 214
KME Grizzly BH's - Inventory....
« on: September 23, 2011, 10:17:00 AM »
Some peeps here have been looking for some Grizzly BH's and having some trouble finding them.

I just got an order in yesterday's mail from Ron @ KME...

He tells me he has some RW (only RW) Grizzly's in the 125 and 135 grain versions available.

His come KME Sharp out of the package....no messing around required.  Just touch-up's after you run them through a critter and into the dirt on the far side.

They are $50.00 for 6 new...."make your eyes bleed if you look at them to long", KME sharp BH's.

His number in case you haven't got it is...
1.800.561.4339

He is currently filling a very large order (the brand I don't know) that has to be ready for tonight's outbound shipment...leave a message if you get his recorder.  He will call you back.

All the best...
B. Scarne

PS - good luck this season...enjoy every minute, be safe, and may all your dreams come true!

Offline Trad-Man

  • Trad Bowhunter
  • **
  • Posts: 214
Re: KME Grizzly BH's - Inventory....
« Reply #1 on: September 23, 2011, 11:30:00 AM »
TTT...............

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Re: KME Grizzly BH's - Inventory....
« Reply #2 on: September 23, 2011, 12:19:00 PM »
One thing for sure. These won't last long.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Offline bentpole

  • Trad Bowhunter
  • **
  • Posts: 5104
Re: KME Grizzly BH's - Inventory....
« Reply #3 on: September 23, 2011, 05:25:00 PM »
KME Sharp = Scary Sharp!   :scared:    :scared:    :scared:

Offline Trad-Man

  • Trad Bowhunter
  • **
  • Posts: 214
Re: KME Grizzly BH's - Inventory....
« Reply #4 on: September 23, 2011, 06:00:00 PM »
Up to the top with this gents!

Offline emac396

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 138
Re: KME Grizzly BH's - Inventory....
« Reply #5 on: September 23, 2011, 06:10:00 PM »
I bought some KME sharp Tuskers, ended up bleeding and I don't remember even touching blade. I didn't think it was possible to get something that sharp.

  • Guest
Re: KME Grizzly BH's - Inventory....
« Reply #6 on: September 23, 2011, 06:47:00 PM »
I just got finished putting a hair splitting edge on a dozen, now it is steak and beer time. $50.00 is a good price for KME sharp.

Offline Neon Quiver

  • Trad Bowhunter
  • **
  • Posts: 59
Re: KME Grizzly BH's - Inventory....
« Reply #7 on: September 23, 2011, 08:46:00 PM »
I just sharpened 3 STOS with my new KME....I am wearing 2 Sponge Bob Squarepants bandaids...

Offline Trad-Man

  • Trad Bowhunter
  • **
  • Posts: 214
Re: KME Grizzly BH's - Inventory....
« Reply #8 on: September 23, 2011, 09:48:00 PM »
If it wern't such a serious topic I'd have to LOL...keep your fingers ON your hands gents...it makes pulling your bow to draw much easier!

Peeps that have not done business with Ron @ KME must have a real hard time understanding just how sharp "KME sharp" really can be.

You quite likely have never seen a re-usable fixed blade head as sharp as these. You had best respect them...much the same way as you would respect a loaded firearm.

Offline Trad-Man

  • Trad Bowhunter
  • **
  • Posts: 214
Re: KME Grizzly BH's - Inventory....
« Reply #9 on: September 24, 2011, 05:46:00 AM »
moving on up to the top.......  :)

Offline Doc Nock

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 9234
Re: KME Grizzly BH's - Inventory....
« Reply #10 on: September 24, 2011, 07:40:00 AM »
I got some Tuskers pre-sharpened by KME. Came with that saw blade rubbery stuff on the edge. Yeah, right!   :rolleyes:  

Ok...those heads were so sharp, it was amazing.

They've been in my quiver foam for over a year!!!...and they're STILL that sharp! I touched em up, but a stroppin on the card board the way Ron says would have been enough!

Hard steel, like Tuskers and Griz, once the bevel is set, STAY very very sharp.

Be bewy, bewy cawful!  :eek:
The words "Child" and "terminal illness" should never share the same sentence! Those who care-do, others question!

TGMM Family of the Bow

Sasquatch LB

Offline Trad-Man

  • Trad Bowhunter
  • **
  • Posts: 214
Re: KME Grizzly BH's - Inventory....
« Reply #11 on: September 24, 2011, 08:10:00 AM »
That rubbery stuff is great....keeps the edge oiled and proteced when not in use.

Once this really hard steel has an edge it is very easy to maintain....

I was going to polish up the edge on the set I got from Ron...no need...It took the hair off my arm with zero effort...absolutley no tug, I could just about shave with them this AM...maybe I could?

I might just do that...put a mirror finish on one and shave with it...if I can get that done I'll video the event and post it right here...!!

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: KME Grizzly BH's - Inventory....
« Reply #12 on: September 24, 2011, 09:09:00 AM »
Ron could sharpen a wet noodle!!! None better to deal with! Shawn
Shawn

Offline Trad-Man

  • Trad Bowhunter
  • **
  • Posts: 214
Re: KME Grizzly BH's - Inventory....
« Reply #13 on: September 24, 2011, 10:19:00 AM »
Shawn...

I love it!  Never heard that one before!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©