3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Nock collars  (Read 476 times)

Offline Ronaldlee

  • Trad Bowhunter
  • **
  • Posts: 45
Nock collars
« on: October 25, 2011, 06:07:00 PM »
Will nock collars prevent arrow damage from a Robin Hood with a field point? Thanks, Ron

Offline Ragnarok Forge

  • Trad Bowhunter
  • **
  • Posts: 3034
Re: Nock collars
« Reply #1 on: October 25, 2011, 07:25:00 PM »
No.
Clay Walker
Skill is not born into anyone.  It is earned thru hard work and perseverance.

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: Nock collars
« Reply #2 on: October 26, 2011, 05:54:00 PM »
On my 3D arrows and indoor setup I use knock inserts in my carbon shafts allowing the use of the tiney G knocks. unless hit dead center it will deflect the incomming arrow with no damage to your shaft. Get plenty of broken knocks but they are easily removed, just heat an allen wrench redhot and insert into the broken knock, let it cool then remove, works every time.

                       James
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Nock collars
« Reply #3 on: October 26, 2011, 10:19:00 PM »
No they won't,didn't help on a CE Maxima.It didn't break but did mushroom from the point driving into it.I have hit a couple of nocks on aluminum with uni-bushings.Destroyed the nock but the arrow was ok.Just replaced the nock and went on shooting.

Offline 3R Shooter

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 272
Re: Nock collars
« Reply #4 on: October 27, 2011, 11:01:00 AM »
The ones I use work just like JamesV says. Might see them split on a really Hard, right in the middle hit, but anything less than that they deflect the arrow to the side, saving the shaft.
I work for 3Rivers Archery as the President.
 www.3RiversArchery.com

Online Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2834
Re: Nock collars
« Reply #5 on: October 27, 2011, 05:53:00 PM »
well on my my maxima arrows I use out of my compound I still destroy my arrows even with the nock collars on the shaft if i aim at the nock of the arrow and try to hit it.  they look cool but for function alone I personally wouldn't buy them.
"Us vs Them"

Offline mmilinovich

  • Trad Bowhunter
  • **
  • Posts: 53
Re: Nock collars
« Reply #6 on: October 28, 2011, 08:35:00 PM »
I'm uncertain as to whether we're all talking about the same thing when we say "nock collar."

I have used Carbon Express arrows exclusively for years; first the CE 100s and now CE 150 Maximas.

For a time, I used a nock collar that was simply a colored aluminum piece.  It was decorative but did little to minimize/eliminate Robin Hoods of which I had many.

Then, I went to G-Nocks and the corresponding G-Nock collar.  That was a different story altogether.  I have banged nocks again and again and again.  Not another Robin Hood.  Not one.

I don't expect to see another Robin Hood with my setup.  Ever.

So I answer: Yes, they will prevent damage and Robin Hoods.

Mark

Offline Ragnarok Forge

  • Trad Bowhunter
  • **
  • Posts: 3034
Re: Nock collars
« Reply #7 on: October 28, 2011, 09:28:00 PM »
You talking about an insert , not  a collar.  Very different things.  Collars don't help.
Clay Walker
Skill is not born into anyone.  It is earned thru hard work and perseverance.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©