Inserts,,tight?

[Scattergun2570]

I just got some Gamegetters. I opened the insert package and stuck one in the shaft. It doesn`t seem to get all the way in the shaft. I didn`t want to force it,being I know it has to be glued in. Are they supposed to be quite tight?

[McDave]

I've always found inserts in aluminum shafts to have a snug fit.  It helps if you ream the opening to put a slight bevel on it before you try to put the insert in.

[swifty99]

I found it also helps to heat the shaft. The heat causes the shaft to expand slightly and the insert goes in easier.

[Night Wing]

Ream the opening and that should make the insert easier to fit.

[Scattergun2570]

Alright,,thanks all.