3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: screw in point on woodies tip needed  (Read 241 times)

Offline mand0ralen

  • Trad Bowhunter
  • **
  • Posts: 119
screw in point on woodies tip needed
« on: December 19, 2011, 04:14:00 PM »
hi all,

Screwing in those field points on my woodies is always mess.

Do you have any tips advices for that ?

best regards.

++M
Logged

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: screw in point on woodies tip needed
« Reply #1 on: December 19, 2011, 04:17:00 PM »
I'd say get a taper tool and glue regular glue on tips on.
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: screw in point on woodies tip needed
« Reply #2 on: December 19, 2011, 05:16:00 PM »
Don't do it. Much better off using glue on heads on wood shafts. If you must, 3-Rivers sells a threaded brass or aluminum collar that is about two inches long.  It's glued over the untapered end of the shaft and the head is screwed into it.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©