3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Broadhead selection  (Read 522 times)

Offline DKdc

  • Trad Bowhunter
  • **
  • Posts: 104
Broadhead selection
« on: December 27, 2011, 11:09:00 AM »
I am thinking about buying the Zwickey Eskilite broadheads for elk hunting> I am a little concerned they are to narrow and will not leave a good blood trail. They are 2 1/4 by 11/16. Is this to small for elk? I am not worried about penetration i am drawing about 63 lbs. Any one have any experience.
Thanks DK

Offline longbowray

  • Trad Bowhunter
  • **
  • Posts: 724
Re: Broadhead selection
« Reply #1 on: December 27, 2011, 11:33:00 AM »
A shape head in the right spot , those heads have kill tons of elk !
BOWHUNTTER FOR LIFE

Offline ChuckC

  • Trad Bowhunter
  • **
  • Posts: 6775
Re: Broadhead selection
« Reply #2 on: December 27, 2011, 01:42:00 PM »
Colorado rule book says 7/8" min  that equals 14/16"  Those are too narrow by that standard.
ChuckC

Offline TOEJAMMER

  • Trad Bowhunter
  • **
  • Posts: 730
Re: Broadhead selection
« Reply #3 on: December 27, 2011, 02:01:00 PM »
I believe he got the width wrong.

Offline ChuckC

  • Trad Bowhunter
  • **
  • Posts: 6775
Re: Broadhead selection
« Reply #4 on: December 27, 2011, 03:25:00 PM »
Maye 1 1/16 ?  (sounds right)
ChuckC

Offline DKdc

  • Trad Bowhunter
  • **
  • Posts: 104
Re: Broadhead selection
« Reply #5 on: December 27, 2011, 03:33:00 PM »
Good point I will check in on that. The zwickey eskilite is 130 grains and my field points are 145. I was going to put on 3 5 grain washers to get up to weight. I am also looking at the woodsman pro 3 blade heads.

Offline Earl E. Nov...mber

  • Trad Bowhunter
  • **
  • Posts: 1275
Re: Broadhead selection
« Reply #6 on: December 27, 2011, 03:41:00 PM »
Yeah 11/16 would be a "narrow" head    :biglaugh:
Many have died for my freedom.
One has died for my soul.

Offline Kituwa

  • Trad Bowhunter
  • **
  • Posts: 375
Re: Broadhead selection
« Reply #7 on: December 27, 2011, 05:18:00 PM »
With a 63# draw if it was me i would try to set up an arrow that weighed around 600-650gr total.A zwickey eskilite is a fine broadhead but if i was useing a two blade with a bow that strong i would use a zwickey delta in two blade or 4 blade version and ad weight adapters to bring it up around 200 grs.A woodsman or snuffer 3 blade would be great too. Most important though would be any broadhead that you can get razor sharp real easy and get that total arrow weight up over 600 grs.

Offline Ringneck

  • Trad Bowhunter
  • **
  • Posts: 978
Re: Broadhead selection
« Reply #8 on: December 27, 2011, 05:43:00 PM »
I'm with Kituwa, if I was shooting 63 pounds I would be using the Deltas.

Offline stujay

  • Trad Bowhunter
  • **
  • Posts: 2192
Re: Broadhead selection
« Reply #9 on: December 27, 2011, 06:20:00 PM »
X3 on the delta's

Offline MikeW

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 1176
Re: Broadhead selection
« Reply #10 on: December 27, 2011, 06:26:00 PM »
I'd be shooting an STOS but that's just me, they all kill if you do your part.
Time is a great teacher, but unfortunately it kills all its pupils.

Offline Montanawidower

  • Trad Bowhunter
  • **
  • Posts: 584
Re: Broadhead selection
« Reply #11 on: December 27, 2011, 09:40:00 PM »
We've had good success with Abowyer brown bears.   They are definately heavier than Zwickey's. But as stated above, heavier is usually better with tough, big animals like a bull elk.  

I shoot a 58# R/D with a 640 grain arrow (300 total up front) and passed through my bull last year.  The two previous bulls it lodged in off side bone.  All three died within 100 yards.  

Regardless of your choice, at 10 grains per pound thats 630 grains.  I'd start around there and adjust to tune.  My two cents.

Offline donw

  • Trad Bowhunter
  • **
  • Posts: 222
Re: Broadhead selection
« Reply #12 on: December 27, 2011, 10:08:00 PM »
i use the eskimos and have for years they work great on all i've hit with them.
i was told by a sales person, when purchasing an out-of-date newpaper that it was out-of-date...

i told her "i've been told i'm out-of-date, too"...

does that mean i'm up-to-date?

Offline JamesKerr

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3575
Re: Broadhead selection
« Reply #13 on: December 27, 2011, 10:55:00 PM »
I would go with the WW Elites. They are the best heads out there in my opinion.
James Kerr

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©