3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Bareshaft help...  (Read 154 times)

Offline Rigs

  • Trad Bowhunter
  • **
  • Posts: 210
Bareshaft help...
« on: February 04, 2012, 10:19:00 AM »
Greetings All,

I've been dinkin around with carbons trying to find one that will shoot good from my bow.  Well, I'm close, but I cannot seem to get rid of nock high.  I've walked the nock up and down on the string and get close (@ 3/8th above) but it's still there.  I've taken the nock down until I know it's slapping up off the shelf.  I really try to squeeze with my back and keep my elbow parallel to the shaft so the pressure is equal on my fingers (shoot split).  Any suggestions??

Feathered shaft shoots great...

Happy hunting,
Jason
Hunting and Fishing ARE family values!  Lifetime member Traditional Bowhunters of Montana, member of Compton Traditional Bowhunters

Offline SS Snuffer

  • Trad Bowhunter
  • **
  • Posts: 942
  • At home in White Oaks and swamps
Re: Bareshaft help...
« Reply #1 on: February 04, 2012, 10:45:00 AM »
I have found the same thing to be true with my set-up. Sooo I'm lookin for an answer also. I know I have shot thru the last 5 deer I have shot so am not to worried about my set-up. My bare shaft seem to fly perfect for about 15yds. and then turns down (tail high)but they hit the same hieght as the fleched shafts out to 25yds. and shoot broadheads just fine.
Chuck
Kodiak Mag 52" 41 lb.
Kota Kill-Um 60" 42 lb.
Kanati 58" 38 lb.
Black Hunter Longbow 60" 40 lb.

No Guts - No Story

Offline Rigs

  • Trad Bowhunter
  • **
  • Posts: 210
Re: Bareshaft help...
« Reply #2 on: February 04, 2012, 11:06:00 AM »
I'm kinda wondering if the heavy front is just starting to show without the feathers working with the arrow...

Happy hunting,
Jason
Hunting and Fishing ARE family values!  Lifetime member Traditional Bowhunters of Montana, member of Compton Traditional Bowhunters

Offline Gary Logsdon

  • Trad Bowhunter
  • **
  • Posts: 1657
Re: Bareshaft help...
« Reply #3 on: February 04, 2012, 12:46:00 PM »
Jason, you may be right.  I've had the same thing happen when shooting extremely weight forward carbons, however it corrected itself once I shot a fletched version.  With three 5" helical feathers the same shaft flew in a tight and quiet spin.
Gary Logsdon

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
Re: Bareshaft help...
« Reply #4 on: February 04, 2012, 01:10:00 PM »
Try shooting a broadhead arrow and a field point arrow side by side. If you broadhed hits high or low, adjust your nock set accordingly.

I have found that it is hard to get all the nock high out of your bare shaft if shooting split finger.

Offline JJB2

  • Trad Bowhunter
  • **
  • Posts: 288
Re: Bareshaft help...
« Reply #5 on: February 04, 2012, 01:22:00 PM »
I get the same thing with my high FOC carbons.  Drove me nuts for a while.  My fletched arrows (BH and FP) fly fine.
Life is tough but it's tougher when you're stupid." - John Wayne

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: Bareshaft help...
« Reply #6 on: February 04, 2012, 02:42:00 PM »
A little lean left or high- say 1" even 2" at 20 yds is an indicator of slightly weak-perfect to fletch. An inch to the right and you still have work to do. This is tuning for a rightie and IMHO.

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Bareshaft help...
« Reply #7 on: February 04, 2012, 04:30:00 PM »
For me I don't worry about alittle nock high when bareshafting.I look more for left or right position of the nock.

Offline Cato

  • Trad Bowhunter
  • **
  • Posts: 119
Re: Bareshaft help...
« Reply #8 on: February 04, 2012, 04:33:00 PM »
Out of curiosity, you might try a second nock set under the nock, probably a tie on.  If not a tie on, be sure and give it a little space.

This can make a big difference with three under.  Not sure it will help, but may be worth a try for split.
Most religions teach that you earn salvation by keeping rules. Jesus didn't teach that "good people" go to heaven. He taught that "forgiven people" go to heaven. And He invited everyone, no matter what their past, to come to Him and be forgiven.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©